Re: [PATCH v4 3/3] kselftest: devices: Add sample board file for XPS 13 9300

Il 22/01/24 19:53, Nícolas F. R. A. Prado ha scritto:
> Add a sample board file describing the file's format and with the list
> of devices expected to be probed on the XPS 13 9300 machine as an
> example x86 platform.
> 
> Test output:
> 
> TAP version 13
> Using board file: boards/Dell Inc.,XPS 13 9300.yaml
> 1..22
> ok 1 /pci-controller/14.0/usb2-controller/9/camera.device
> ok 2 /pci-controller/14.0/usb2-controller/9/camera.0.driver
> ok 3 /pci-controller/14.0/usb2-controller/9/camera.1.driver
> ok 4 /pci-controller/14.0/usb2-controller/9/camera.2.driver
> ok 5 /pci-controller/14.0/usb2-controller/9/camera.3.driver
> ok 6 /pci-controller/14.0/usb2-controller/10/bluetooth.device
> ok 7 /pci-controller/14.0/usb2-controller/10/bluetooth.0.driver
> ok 8 /pci-controller/14.0/usb2-controller/10/bluetooth.1.driver
> ok 9 /pci-controller/2.0/gpu.device
> ok 10 /pci-controller/2.0/gpu.driver
> ok 11 /pci-controller/4.0/thermal.device
> ok 12 /pci-controller/4.0/thermal.driver
> ok 13 /pci-controller/12.0/sensors.device
> ok 14 /pci-controller/12.0/sensors.driver
> ok 15 /pci-controller/14.3/wifi.device
> ok 16 /pci-controller/14.3/wifi.driver
> ok 17 /pci-controller/1d.0/0.0/ssd.device
> ok 18 /pci-controller/1d.0/0.0/ssd.driver
> ok 19 /pci-controller/1d.7/0.0/sdcard-reader.device
> ok 20 /pci-controller/1d.7/0.0/sdcard-reader.driver
> ok 21 /pci-controller/1f.3/audio.device
> ok 22 /pci-controller/1f.3/audio.driver
> Totals: pass:22 fail:0 xfail:0 xpass:0 skip:0 error:0
> 
> Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
> ---
>   .../devices/boards/Dell Inc.,XPS 13 9300.yaml      | 40 ++++++++++++++++++++++
>   1 file changed, 40 insertions(+)
> 
> diff --git a/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml b/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml
> new file mode 100644
> index 000000000000..ff932eb19f0b
> --- /dev/null
> +++ b/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml	
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# This is the device definition for the XPS 13 9300.
> +# The filename "Dell Inc.,XPS 13 9300" was chosen following the format
> +# "Vendor,Product", where Vendor comes from
> +# /sys/devices/virtual/dmi/id/sys_vendor, and Product comes from
> +# /sys/devices/virtual/dmi/id/product_name.
> +#
> +# See google,spherion.yaml for more information.

What if - instead of taking google,spherion.yaml as an example - you create a new
file named something like

"example,device.yaml"

that would be a fantasy device, bringing examples for all .. or most of .. the
currently supported types/devices?

You would also move the nice documentation that you wrote in spherion.yaml to the
new example,device.yaml and ask to refer to that instead in all of the real device
specific definitions.

# SPDX-License-Identifier: GPL-2.0 <--- (GPL-2.0 OR MIT) like device trees perhaps?
#
# This is the device definition for the Example Device
# The filename "Example Device" was chosen following the format
# "Vendor,Product", where:
#  - Vendor is "Example" and comes from /sys/devices/virtual/dmi/id/sys_vendor
#  - Product is "Device" and comes from /sys/devices/virtual/dmi/id/product_name
#
# ....the rest of the blurb goes here
#

- type : .... this that the other
   devices:
     - the least amount of device descriptions that you can use for documenting how
       to write this stuff :-)

Anything against that?

Cheers,
Angelo

> +#
> +- type: pci-controller
> +  # This machine has a single PCI host controller so it's valid to not have any
> +  # key to identify the controller. If it had more than one controller, the UID
> +  # of the controller from ACPI could be used to distinguish as follows:
> +  #acpi-uid: 0
> +  devices:
> +    - path: 14.0
> +      type: usb-controller
> +      usb-version: 2
> +      devices:
> +        - path: 9
> +          name: camera
> +          interfaces: [0, 1, 2, 3]
> +        - path: 10
> +          name: bluetooth
> +          interfaces: [0, 1]
> +    - path: 2.0
> +      name: gpu
> +    - path: 4.0
> +      name: thermal
> +    - path: 12.0
> +      name: sensors
> +    - path: 14.3
> +      name: wifi
> +    - path: 1d.0/0.0
> +      name: ssd
> +    - path: 1d.7/0.0
> +      name: sdcard-reader
> +    - path: 1f.3
> +      name: audio
>