Re: [PATCH v2 0/3] kselftest: Add test to report device log errors

On 7/11/24 15:44, Nícolas F. R. A. Prado wrote:
> On Thu, Jul 11, 2024 at 01:53:37PM -0600, Shuah Khan wrote:
>> On 7/10/24 15:49, Shuah Khan wrote:
>>> On 7/10/24 07:11, Greg Kroah-Hartman wrote:
>>>> On Fri, Jul 05, 2024 at 07:29:53PM -0400, Nícolas F. R. A. Prado wrote:
>>>>> Log errors are the most widely used mechanism for reporting issues in
>>>>> the kernel. When an error is logged using the device helpers, eg
>>>>> dev_err(), it gets metadata attached that identifies the subsystem and
>>>>> device where the message is coming from. This series makes use of that
>>>>> metadata in a new test to report which devices logged errors.
>>>>>
>>>>> The first two patches move a test and a helper script to keep things
>>>>> organized before this new test is added in the third patch.
>>>>>
>>>>> It is expected that there might be many false-positive error messages
>>>>> throughout the drivers code which will be reported by this test. By
>>>>> having this test in the first place and working through the results we
>>>>> can address those occurrences by adjusting the loglevel of the messages
>>>>> that turn out to not be real errors that require the user's attention.
>>>>> It will also motivate additional error messages to be introduced in the
>>>>> code to detect real errors where they turn out to be missing, since
>>>>> it will be possible to detect said issues automatically.
>>>>>
>>>>> As an example, below you can see the test result for
>>>>> mt8192-asurada-spherion. The single standing issue has been investigated
>>>>> and will be addressed in an EC firmware update [1]:
>>>>>
>>>>> TAP version 13
>>>>> 1..1
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `model_name' property: -6
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `energy_full_design' property: -6
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>>    power_supply sbs-8-000b: driver failed to report `time_to_empty_now' property: -5
>>>>> not ok 1 +power_supply:sbs-8-000b
>>>>>    Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
>>>>>
>>>>> [1] https://lore.kernel.org/all/cf4d8131-4b63-4c7a-9f27-5a0847c656c4@notapiano
>>>>>
>>>>> Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
>>>>
>>>> Acked-by: Greg Kroah-Hartman <[email protected]>
>>>
>>> Is this dependent on a linux-next?
>>>
>>> Didn't apply to linux-kselftest next.
>>>
>>
>> I tried applying these on top of linux-kselftest next which is at
>> Linux 6.10-rc7 + other patches.
>>
>> I am not sure what is wrong - first patch applies and the second
>> and third don't.
>>
>> git am fails and manual patch application worked for 2/3, same thing
>> with 3.3 - these should apply cleanly since they don't have obvious
>> conflicts.
>>
>> Please clean this up and send me updated series adding Greg's ack.
> 
> Oh, now I see what happened. I recently sent another series that touches the
> same file (tools/testing/selftests/devices/test_discoverable_devices.py):
> "kselftest: devices: Allow running test on more platforms"
> https://lore.kernel.org/all/20240613-kselftest-discoverable-probe-mt8195-kci-v1-1-7b396a9b032d@collabora.com/
> 
> That was already merged through the usb tree, and is present on next (on which I
> based this series).
> 
> In this case I imagine it's best if this series gets picked through the usb
> tree, right? Even if I rebase on kselftest's next, there will be conflicts.
> 

I see. No problem. It can go through usb tree

Acked-by: Shuah Khan <[email protected]>

thanks,
-- Shuah