[PATCH] dt-bindings: leds: bcm6358: Convert to DT schema

Convert the brcm,bcm6358 to DT schema.

Signed-off-by: Ninad Naik <[email protected]>
---

Referred to this thread:
https://lore.kernel.org/all/[email protected]/
and added the fixes suggested.

 .../bindings/leds/brcm,bcm6358-leds.yaml      |  98 ++++++++++++
 .../devicetree/bindings/leds/leds-bcm6358.txt | 143 ------------------
 2 files changed, 98 insertions(+), 143 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/brcm,bcm6358-leds.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-bcm6358.txt

diff --git a/Documentation/devicetree/bindings/leds/brcm,bcm6358-leds.yaml b/Documentation/devicetree/bindings/leds/brcm,bcm6358-leds.yaml
new file mode 100644
index 000000000000..a61417e5690b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/brcm,bcm6358-leds.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/brcm,bcm6358-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6358 controller
+
+description: |
+  This controller is present on BCM6358 and BCM6368.
+  In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
+  which can either be controlled by software (exporting the 74x164 as spi-gpio.
+  See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
+  by hardware using this driver.
+
+maintainers:
+  - Jonas Gorski <[email protected]>
+
+properties:
+  compatible:
+    const: brcm,bcm6358-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  brcm,clk-div:
+    description: SCK signal divider.
+    default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  brcm,clk-dat-low:
+    description: Makes clock and data signals active low.
+    type: boolean
+
+patternProperties:
+  "^led@(0|1?[0-9a-f])$":
+    type: object
+    $ref: common.yaml#
+    description: Each LED is represented as a sub-node of
+      this device.
+
+    properties:
+      reg:
+        description: LED pin number.
+        minimum: 0
+        maximum: 31
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    led-controller@fffe00d0 {
+        compatible = "brcm,bcm6358-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xfffe00d0 0x8>;
+
+        led@0 {
+            reg = <0>;
+            active-low;
+            label = "white:alarm";
+        };
+        led@2 {
+            reg = <2>;
+            active-low;
+            label = "white:tv";
+        };
+        led@3 {
+            reg = <3>;
+            active-low;
+            label = "white:tel";
+        };
+        led@4 {
+            reg = <4>;
+            active-low;
+            label = "white:adsl";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
deleted file mode 100644
index 211ffc3c4a20..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ /dev/null
@@ -1,143 +0,0 @@
-LEDs connected to Broadcom BCM6358 controller
-
-This controller is present on BCM6358 and BCM6368.
-In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
-which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
-by hardware using this driver.
-
-Required properties:
-  - compatible : should be "brcm,bcm6358-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6358 LED controller address and size.
-
-Optional properties:
-  - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
-    Default : 1
-  - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 31 are valid).
-
-LED sub-node optional properties:
-  - label : see Documentation/devicetree/bindings/leds/common.txt
-  - default-state : see
-    Documentation/devicetree/bindings/leds/common.txt
-  - linux,default-trigger : see
-    Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-Scenario 1 : BCM6358
-	leds0: led-controller@fffe00d0 {
-		compatible = "brcm,bcm6358-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xfffe00d0 0x8>;
-
-		alarm_white {
-			reg = <0>;
-			active-low;
-			label = "white:alarm";
-		};
-		tv_white {
-			reg = <2>;
-			active-low;
-			label = "white:tv";
-		};
-		tel_white {
-			reg = <3>;
-			active-low;
-			label = "white:tel";
-		};
-		adsl_white {
-			reg = <4>;
-			active-low;
-			label = "white:adsl";
-		};
-	};
-
-Scenario 2 : BCM6368
-	leds0: led-controller@100000d0 {
-		compatible = "brcm,bcm6358-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x100000d0 0x8>;
-		brcm,pol-low;
-		brcm,clk-div = <4>;
-
-		power_red {
-			reg = <0>;
-			active-low;
-			label = "red:power";
-		};
-		power_green {
-			reg = <1>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		power_blue {
-			reg = <2>;
-			label = "blue:power";
-		};
-		broadband_red {
-			reg = <3>;
-			active-low;
-			label = "red:broadband";
-		};
-		broadband_green {
-			reg = <4>;
-			label = "green:broadband";
-		};
-		broadband_blue {
-			reg = <5>;
-			active-low;
-			label = "blue:broadband";
-		};
-		wireless_red {
-			reg = <6>;
-			active-low;
-			label = "red:wireless";
-		};
-		wireless_green {
-			reg = <7>;
-			active-low;
-			label = "green:wireless";
-		};
-		wireless_blue {
-			reg = <8>;
-			label = "blue:wireless";
-		};
-		phone_red {
-			reg = <9>;
-			active-low;
-			label = "red:phone";
-		};
-		phone_green {
-			reg = <10>;
-			active-low;
-			label = "green:phone";
-		};
-		phone_blue {
-			reg = <11>;
-			label = "blue:phone";
-		};
-		upgrading_red {
-			reg = <12>;
-			active-low;
-			label = "red:upgrading";
-		};
-		upgrading_green {
-			reg = <13>;
-			active-low;
-			label = "green:upgrading";
-		};
-		upgrading_blue {
-			reg = <14>;
-			label = "blue:upgrading";
-		};
-	};
-- 
2.54.0