Re: [PATCH net 1/2] net: macb: reprogram TBQP after shuffling the TX ring on link-up
Théo Lebrun <[email protected]>
| Newsgroups | dev.linux.lists.linux-rt-devel,org.kernel.vger.linux-kernel,org.kernel.vger.netdev,org.kernel.vger.stable |
|---|---|
| Message-ID | <[email protected]> |
Hello Kevin & Christian, On Wed Jul 8, 2026 at 5:05 AM CEST, Kevin Hao wrote: >> I agree that the TRM says the transmit pointer is reset while TE is low. My >> question is whether this describes an internal pointer being reloaded from TBQP, >> or whether TBQP itself is restored to the original ring base. > > The Zynq UltraScale TRM [1] describes the receive-buffer queue pointer as follows: > > An internal counter represents the receive-buffer queue pointer and it is not > visible through the CPU interface. > > I could not find a similar description for the transmit-buffer queue pointer, > but I believe it behaves the same way. From a software perspective, it should > be safe to assume that the TBQP is reset to point to the start of the transmit > descriptor list upon reset. This assumption is supported by the description > of the transmit_q_ptr (GEM) Register [2]: > > Reading this register returns the location of the descriptor currently being accessed. > Since the DMA handles two frames at once, this may not necessarily be pointing to the > current frame being transmitted. > > [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm > [2] https://docs.amd.com/r/en-US/ug1087-zynq-ultrascale-registers/transmit_q_ptr-GEM-Register For what it's worth, I agree with Kevin. It should be rather easy to detect if the patch is needed, with more logging. Dump TBQP before link-down & dump it at link-up. The code expects TBQP to reset to the ring start automatically whereas this commit message says the TBQP after link-up is some offset into the ring. Lastly, the cover letter mentions that [PATCH 1/2] alone isn't enough. But it doesn't mention that [PATCH 2/2] alone doesn't solve the issue. This would be a useful test as well. On Tue Jul 7, 2026 at 3:36 PM CEST, Taedcke, Christian wrote: > Thank you for the quick review! This is my first Linux kernel > contribution, so I appreciate your feedback here. Welcome! Thanks, -- Théo Lebrun, Bootlin Embedded Linux and Kernel engineering https://bootlin.com