[PATCH v2 0/3] media: rc: sunxi-cir: support the A523/H728/T527 IR receiver

Justin Suess <[email protected]>
Newsgroups dev.linux.lists.linux-sunxi,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-media
Message-ID <[email protected]>
Sorry for the delay,

This is v2 of the series that adds support for the CIR
receiver found in the Allwinner A523/T527/H728 family (sun55i).

Unlike the previous version of the series, this version has no driver changes,
and just uses a fallback compatible and enables the receiver.

Tested again on my X96Q Pro+ (H728) TV box with the Google TV remote that
came in the box (using NEC keymap). Was able to press buttons and
get readings from lirc / ir-keytable again.

The series is (re)based on tag v7.2-rc4 on mainline.

Justin Suess (3):
  media: dt-bindings: allwinner,sun4i-a10-ir: add A523 compatible
  arm64: dts: allwinner: a523: add IR receiver nodes
  arm64: dts: allwinner: a523: enable IR receiver on the X96Q Pro+

 .../media/allwinner,sun4i-a10-ir.yaml         |  8 ++++--
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 28 +++++++++++++++++++
 .../dts/allwinner/sun55i-h728-x96qpro+.dts    |  6 ++++
 3 files changed, 39 insertions(+), 3 deletions(-)


base-commit: 1590cf0329716306e948a8fc29f1d3ee87d3989f
-- 
2.54.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.