[PATCH v2 3/3] ARM: dts: sun9i-a80: Add thermal sensor and thermal zones

From: Philipp Rossak <[email protected]>

Now that the A80 thermal sensor is supported, add its device node and
the thermal zones to the device tree.

The clocks and the resets are shared between the GPADC and the THS
sensor. Sensor 0 is located beside the big CPU cluster, sensor 1
beside the DRAM controller, sensor 2 beside the GPU and sensor 3
beside the little CPU cluster.

Signed-off-by: Philipp Rossak <[email protected]>
[soeren: rebased from the 2018 series, fixed the interrupt number
(SPI 115 as in the vendor BSP; verified on hardware - SPI 31 stays
silent), added critical trip points matching the driver's emergency
shutdown threshold]
Co-authored-by: Claude Fable 5 <[email protected]>
Signed-off-by: Sören Hantel <[email protected]>
---
 arch/arm/boot/dts/allwinner/sun9i-a80.dtsi | 68 ++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
index a1ae092..8e7f8cd 100644
--- a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -941,6 +941,16 @@
 			#reset-cells = <1>;
 		};
 
+		ths: thermal-sensor@6004c00 {
+			compatible = "allwinner,sun9i-a80-ths";
+			reg = <0x06004c00 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_GPADC>, <&ccu CLK_GPADC>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_GPADC>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@6000c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x06000c00 0xa0>;
@@ -1250,4 +1260,62 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_crit: cpu0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dram_thermal: dram-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				dram_crit: dram-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 2>;
+
+			trips {
+				gpu_crit: gpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&ths 3>;
+
+			trips {
+				cpu2_crit: cpu2-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
-- 
2.43.0