[PATCH v3 2/4] arm64: dts: allwinner: a523: add IR receiver nodes

The A523 has two CIR receivers, both compatible with the A31 CIR: one
in the CPUX domain, clocked from the main CCU, and one in the RTC
power domain, clocked from the R-CCU.

Add nodes for both instances, disabled by default. Since the RX signal
of each instance can be routed to more than one pin, boards with an IR
receiver are expected to add the pinctrl properties next to where they
enable the node. Keep the PL11 pin description in the dtsi, as boards
commonly use that pin for the RTC domain instance.

Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Justin Suess <[email protected]>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index ca6a16807049..c2de662140ce 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -327,6 +327,17 @@ ccu: clock-controller@2001000 {
 			#reset-cells = <1>;
 		};
 
+		ir: ir@2005000 {
+			compatible = "allwinner,sun55i-a523-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x02005000 0x400>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IR_RX>, <&ccu CLK_IR_RX>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR_RX>;
+			status = "disabled";
+		};
+
 		ledc: led-controller@2008000 {
 			compatible = "allwinner,sun55i-a523-ledc",
 				     "allwinner,sun50i-a100-ledc";
@@ -927,6 +938,23 @@ r_i2c_pins: r-i2c-pins {
 				allwinner,pinmux = <2>;
 				function = "r_i2c0";
 			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				allwinner,pinmux = <2>;
+				function = "s_cir_rx";
+			};
+		};
+
+		r_ir: ir@7040000 {
+			compatible = "allwinner,sun55i-a523-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x07040000 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_BUS_R_IR_RX>, <&r_ccu CLK_R_IR_RX>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_BUS_R_IR_RX>;
+			status = "disabled";
 		};
 
 		pck600: power-controller@7060000 {
-- 
2.54.0