[PATCH 4/6] net: phy: maxio: extend PHY ID matching

Currently the maxio Ethernet PHY driver expects a PHY matching exactly the
one ID provided: 0x7b744412. The Maxio MAE0621A-Q3C model used on
the Allwinner based X96QPro+ TV box uses a slightly different PHY ID:
0x7b744411.

Replace the "exact match" requirement with the more relaxed "model
match" version, which ignores the lowest 4 bits of the PHY ID. Both
PHYs should now be recognised by the driver.

Signed-off-by: Andre Przywara <[email protected]>
---
 drivers/net/phy/maxio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/maxio.c b/drivers/net/phy/maxio.c
index 5fabf99fb90f..d97fb50cdbe1 100644
--- a/drivers/net/phy/maxio.c
+++ b/drivers/net/phy/maxio.c
@@ -87,7 +87,7 @@ static int maxio_mae0621a_config_init(struct phy_device *phydev)
 
 static struct phy_driver maxio_drivers[] = {
 	{
-		PHY_ID_MATCH_EXACT(MAXIO_MAE0621A_PHY_ID),
+		PHY_ID_MATCH_MODEL(MAXIO_MAE0621A_PHY_ID),
 		.name		= "Maxio MAE0621A",
 		.probe		= maxio_mae0621a_probe,
 		.config_init	= maxio_mae0621a_config_init,
@@ -100,7 +100,7 @@ static struct phy_driver maxio_drivers[] = {
 module_phy_driver(maxio_drivers);
 
 static const struct mdio_device_id __maybe_unused maxio_tbl[] = {
-	{ PHY_ID_MATCH_EXACT(MAXIO_MAE0621A_PHY_ID) },
+	{ PHY_ID_MATCH_MODEL(MAXIO_MAE0621A_PHY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(mdio, maxio_tbl);
-- 
2.43.0