[PATCH 12/13] drm/sun4i: hdmi-phy: Fix H6 8-bit MPLL config at 594 MHz

The 8-bit entry of the last MPLL row (594 MHz) doesn't lock reliably on
H6. 4K@60 RGB/YUV444, which is the mode that reaches this entry, doesn't
come up.

Align the value with the vendor driver. Other entries are left alone,
they are used by lower pixel clocks which work fine.

Tested with 4K@60 on a LG TV.

Fixes: 0fb4b858b102 ("drm/sun4i: Add support for H6 HDMI PHY")
Signed-off-by: Jernej Skrabec <[email protected]>
---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 4fa69c463dc4..489ea94693ff 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -91,7 +91,7 @@ static const struct dw_hdmi_mpll_config sun50i_h6_mpll_cfg[] = {
 		},
 	},  {
 		594000000, {
-			{ 0x1a40, 0x0003 },
+			{ 0x1a7c, 0x0003 },
 			{ 0x3b4c, 0x0003 },
 			{ 0x5a64, 0x0003 },
 		},
-- 
2.43.0