Re: [PATCH v4 4/5] tools/memory-model: Switch to softcoded herd7 tags
Boqun Feng <[email protected]>
| Newsgroups | dev.linux.lists.lkmm,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Mon, Sep 30, 2024 at 12:57:09PM +0200, Jonas Oberhauser wrote: > A new version of herd7 provides a -lkmmv2 switch which overrides the old herd7 > behavior of simply ignoring any softcoded tags in the .def and .bell files. We > port LKMM to this version of herd7 by providing the switch in linux-kernel.cfg > and reporting an error if the LKMM is used without this switch. > > To preserve the semantics of LKMM, we also softcode the Noreturn tag on atomic > RMW which do not return a value and define atomic_add_unless with an Mb tag in > linux-kernel.def. > > We update the herd-representation.txt accordingly and clarify some of the > resulting combinations. > > (To be) Signed-off-by: Hernan Ponce de Leon <[email protected]> > Signed-off-by: Jonas Oberhauser <[email protected]> Reviewed-by: Boqun Feng <[email protected]> One bit below: > --- > .../Documentation/herd-representation.txt | 27 ++++++++++--------- > tools/memory-model/README | 2 +- > tools/memory-model/linux-kernel.bell | 3 +++ > tools/memory-model/linux-kernel.cfg | 1 + > tools/memory-model/linux-kernel.def | 18 +++++++------ > 5 files changed, 30 insertions(+), 21 deletions(-) > > diff --git a/tools/memory-model/Documentation/herd-representation.txt b/tools/memory-model/Documentation/herd-representation.txt > index ed988906f2b7..7ae1ff3d3769 100644 > --- a/tools/memory-model/Documentation/herd-representation.txt > +++ b/tools/memory-model/Documentation/herd-representation.txt > @@ -18,6 +18,11 @@ > # > # By convention, a blank line in a cell means "same as the preceding line". > # > +# Note that the syntactic representation does not always match the sets and > +# relations in linux-kernel.cat, due to redefinitions in linux-kernel.bell and > +# lock.cat. For example, the po link between LKR and LKW is upgraded to an rmw > +# link, and W[acquire] are not included in the Acquire set. > +# > # Disclaimer. The table includes representations of "add" and "and" operations; > # corresponding/identical representations of "sub", "inc", "dec" and "or", "xor", > # "andnot" operations are omitted. > @@ -60,14 +65,13 @@ > ------------------------------------------------------------------------------ > | RMW ops w/o return value | | > ------------------------------------------------------------------------------ > - | atomic_add | R*[noreturn] ->rmw W*[once] | > + | atomic_add | R*[noreturn] ->rmw W*[noreturn] | Not in this patch, but don't you need to update this again to all cap to match your changes in patch #5? ;-) Regards, Boqun > | atomic_and | | > | spin_lock | LKR ->po LKW | > ------------------------------------------------------------------------------ > | RMW ops w/ return value | | > ------------------------------------------------------------------------------ > - | atomic_add_return | F[mb] ->po R*[once] | > - | | ->rmw W*[once] ->po F[mb] | > + | atomic_add_return | R*[mb] ->rmw W*[mb] | > | atomic_fetch_add | | > | atomic_fetch_and | | > | atomic_xchg | | > @@ -79,13 +83,13 @@ > | atomic_xchg_relaxed | | > | xchg_relaxed | | > | atomic_add_negative_relaxed | | > - | atomic_add_return_acquire | R*[acquire] ->rmw W*[once] | > + | atomic_add_return_acquire | R*[acquire] ->rmw W*[acquire] | > | atomic_fetch_add_acquire | | > | atomic_fetch_and_acquire | | > | atomic_xchg_acquire | | > | xchg_acquire | | > | atomic_add_negative_acquire | | > - | atomic_add_return_release | R*[once] ->rmw W*[release] | > + | atomic_add_return_release | R*[release] ->rmw W*[release] | > | atomic_fetch_add_release | | > | atomic_fetch_and_release | | > | atomic_xchg_release | | > @@ -94,17 +98,16 @@ > ------------------------------------------------------------------------------ > | Conditional RMW ops | | > ------------------------------------------------------------------------------ > - | atomic_cmpxchg | On success: F[mb] ->po R*[once] | > - | | ->rmw W*[once] ->po F[mb] | > - | | On failure: R*[once] | > + | atomic_cmpxchg | On success: R*[mb] ->rmw W*[mb] | > + | | On failure: R*[mb] | > | cmpxchg | | > | atomic_add_unless | | > | atomic_cmpxchg_relaxed | On success: R*[once] ->rmw W*[once] | > | | On failure: R*[once] | > - | atomic_cmpxchg_acquire | On success: R*[acquire] ->rmw W*[once] | > - | | On failure: R*[once] | > - | atomic_cmpxchg_release | On success: R*[once] ->rmw W*[release] | > - | | On failure: R*[once] | > + | atomic_cmpxchg_acquire | On success: R*[acquire] ->rmw W*[acquire] | > + | | On failure: R*[acquire] | > + | atomic_cmpxchg_release | On success: R*[release] ->rmw W*[release] | > + | | On failure: R*[release] | > | spin_trylock | On success: LKR ->po LKW | > | | On failure: LF | > ------------------------------------------------------------------------------ > diff --git a/tools/memory-model/README b/tools/memory-model/README > index dab38904206a..59bc15edeb8a 100644 > --- a/tools/memory-model/README > +++ b/tools/memory-model/README > @@ -20,7 +20,7 @@ that litmus test to be exercised within the Linux kernel. > REQUIREMENTS > ============ > > -Version 7.52 or higher of the "herd7" and "klitmus7" tools must be > +Version 7.58 or higher of the "herd7" and "klitmus7" tools must be > downloaded separately: > > https://github.com/herd/herdtools7 > diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell > index 7c9ae48b9437..8ae47545df97 100644 > --- a/tools/memory-model/linux-kernel.bell > +++ b/tools/memory-model/linux-kernel.bell > @@ -94,3 +94,6 @@ let carry-dep = (data ; [~ Srcu-unlock] ; rfi)* > let addr = carry-dep ; addr > let ctrl = carry-dep ; ctrl > let data = carry-dep ; data > + > +flag ~empty (if "lkmmv2" then 0 else _) > + as this-model-requires-variant-higher-than-lkmmv1 > diff --git a/tools/memory-model/linux-kernel.cfg b/tools/memory-model/linux-kernel.cfg > index 3c8098e99f41..69b04f3aad73 100644 > --- a/tools/memory-model/linux-kernel.cfg > +++ b/tools/memory-model/linux-kernel.cfg > @@ -1,6 +1,7 @@ > macros linux-kernel.def > bell linux-kernel.bell > model linux-kernel.cat > +variant lkmmv2 > graph columns > squished true > showevents noregs > diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def > index a12b96c547b7..d7279a357cba 100644 > --- a/tools/memory-model/linux-kernel.def > +++ b/tools/memory-model/linux-kernel.def > @@ -63,14 +63,14 @@ atomic_set(X,V) { WRITE_ONCE(*X,V); } > atomic_read_acquire(X) smp_load_acquire(X) > atomic_set_release(X,V) { smp_store_release(X,V); } > > -atomic_add(V,X) { __atomic_op(X,+,V); } > -atomic_sub(V,X) { __atomic_op(X,-,V); } > -atomic_and(V,X) { __atomic_op(X,&,V); } > -atomic_or(V,X) { __atomic_op(X,|,V); } > -atomic_xor(V,X) { __atomic_op(X,^,V); } > -atomic_inc(X) { __atomic_op(X,+,1); } > -atomic_dec(X) { __atomic_op(X,-,1); } > -atomic_andnot(V,X) { __atomic_op(X,&~,V); } > +atomic_add(V,X) { __atomic_op{noreturn}(X,+,V); } > +atomic_sub(V,X) { __atomic_op{noreturn}(X,-,V); } > +atomic_and(V,X) { __atomic_op{noreturn}(X,&,V); } > +atomic_or(V,X) { __atomic_op{noreturn}(X,|,V); } > +atomic_xor(V,X) { __atomic_op{noreturn}(X,^,V); } > +atomic_inc(X) { __atomic_op{noreturn}(X,+,1); } > +atomic_dec(X) { __atomic_op{noreturn}(X,-,1); } > +atomic_andnot(V,X) { __atomic_op{noreturn}(X,&~,V); } > > atomic_add_return(V,X) __atomic_op_return{mb}(X,+,V) > atomic_add_return_relaxed(V,X) __atomic_op_return{once}(X,+,V) > @@ -144,3 +144,5 @@ atomic_fetch_andnot(V,X) __atomic_fetch_op{mb}(X,&~,V) > atomic_fetch_andnot_acquire(V,X) __atomic_fetch_op{acquire}(X,&~,V) > atomic_fetch_andnot_release(V,X) __atomic_fetch_op{release}(X,&~,V) > atomic_fetch_andnot_relaxed(V,X) __atomic_fetch_op{once}(X,&~,V) > + > +atomic_add_unless(X,V,W) __atomic_add_unless{mb}(X,V,W) > -- > 2.34.1 > >