Re: [PATCH v2] dt-bindings: mfd: Convert TI TWL6040 to DT schema

On Sun, Aug 16, 2026 at 7:00 PM Dhruva G <[email protected]> wrote:
>
> Hi Eduard,
>
> On 16-08-2026 14:58, Eduard Bostina wrote:
> > Convert the Texas Instruments TWL6040 audio codecs family bindings to DT
> > schema.
> >
> > During the conversion, the following updates were made:
> > - Changed 'twl6040,audpwron-gpio' to 'ti,audpwron-gpio', which was
> >   misnamed in the old txt binding.
> > - Made 'gpio-controller', '#gpio-cells', and 'ti,audpwron-gpio' optional
> >   because modern platforms do not require them.
> > - Renamed the vibra 'vddvibl_uV'/'vddvibr_uV' properties to
> >   'ti,vddvibl-uV'/'ti,vddvibr-uV', the names actually read by the
> >   twl6040-vibra driver.
> >
> > Signed-off-by: Eduard Bostina <[email protected]>
> > ---
> > Changes in v2:
> > - Renamed the vibra 'vddvibl_uV'/'vddvibr_uV' properties to
> >   'ti,vddvibl-uV'/'ti,vddvibr-uV', the names actually read by the
> >   twl6040-vibra driver.
> >
> > Link to v1: https://lore.kernel.org/all/[email protected]/
> >
> >  .../devicetree/bindings/mfd/ti,twl6040.yaml   | 142 ++++++++++++++++++
> >  .../devicetree/bindings/mfd/twl6040.txt       |  67 ---------
> >  2 files changed, 142 insertions(+), 67 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/ti,twl6040.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/mfd/twl6040.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/ti,twl6040.yaml b/Documentation/devicetree/bindings/mfd/ti,twl6040.yaml
> > new file mode 100644
> [..snip..]
> > +
> > +  vddvibl-supply:
> > +    description: Regulator for the left vibra motor
> > +
> > +  vddvibr-supply:
> > +    description: Regulator for the right vibra motor
> > +
> > +  vibra:
> > +    type: object
> > +    additionalProperties: false
> > +    properties:
> > +      ti,vibldrv-res:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: Resistance parameter for left driver
> > +      ti,vibrdrv-res:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: Resistance parameter for right driver
> > +      ti,viblmotor-res:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: Resistance parameter for left motor
> > +      ti,vibrmotor-res:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: Resistance parameter for right motor
> > +      ti,vddvibl-uV:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: vddvibl default voltage if it needs to be changed
> > +      ti,vddvibr-uV:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: vddvibr default voltage if it needs to be changed
> > +
> > +    required:
> > +      - ti,vibldrv-res
> > +      - ti,vibrdrv-res
> > +      - ti,viblmotor-res
> > +      - ti,vibrmotor-res
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - "#clock-cells"
> > +  - vio-supply
> > +  - v2v1-supply
>
> I think the vibra supplies need to be conditionally required when the vibra child is present.
> twl6040_has_vibra() uses the presence of this child to instantiate twl6040-vibra, whose probe
> then unconditionally gets both vddvibl and vddvibr.
>
> Would something like this make sense?
>
> allOf:
>   - if:
>       required:
>         - vibra
>     then:
>       required:
>         - vddvibl-supply
>         - vddvibr-supply
>
> This would still allow TWL6040 users without vibra, while retaining the dependency for users which enable it.

You're right, thanks. I'll fix it in v3.

> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        audio-codec@4b {
> > +            compatible = "ti,twl6040";
> > +            reg = <0x4b>;
> > +            interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-parent = <&gic>;
> > +            gpio-controller;
> > +            #gpio-cells = <1>;
> > +            #clock-cells = <0>;
> > +            ti,audpwron-gpio = <&gpio4 31 0>;
> > +
> > +            vio-supply = <&v1v8>;
> > +            v2v1-supply = <&v2v1>;
> > +            enable-active-high;
> > +
> > +            /* regulators for vibra motor */
> > +            vddvibl-supply = <&vbat>;
> > +            vddvibr-supply = <&vbat>;
> > +
> > +            vibra {
> > +                ti,vibldrv-res = <8>;
> > +                ti,vibrdrv-res = <3>;
> > +                ti,viblmotor-res = <10>;
> > +                ti,vibrmotor-res = <10>;
> > +            };
> > +        };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
> > deleted file mode 100644
>
> [..snip..]