[PATCH net-next v19 02/10] dt-bindings: net: Document support for AN8855 Switch Internal PHY

Document support for AN8855 Switch Internal PHY.

Airoha AN8855 is a 5-port Gigabit Switch that expose the Internal
PHYs on the MDIO bus.

Each PHY might need to be calibrated to correctly work with the
use of the eFUSE provided by the Switch SoC. This can be enabled by
defining in the PHY node the NVMEM cell properties.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
---
 .../bindings/net/airoha,an8855-phy.yaml       | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml

diff --git a/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml b/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
new file mode 100644
index 000000000000..d2f86116badf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/airoha,an8855-phy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN8855 Switch Internal PHY
+
+maintainers:
+  - Christian Marangi <[email protected]>
+
+description: >
+  Airoha AN8855 is a 5-port Gigabit Switch that expose the Internal
+  PHYs on the MDIO bus.
+
+  Each PHY might need to be calibrated to correctly work with the
+  use of the eFUSE provided by the Switch SoC.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-idc0ff.0410
+  required:
+    - compatible
+
+properties:
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    items:
+      - description: phandle to SoC eFUSE tx_a
+      - description: phandle to SoC eFUSE tx_b
+      - description: phandle to SoC eFUSE tx_c
+      - description: phandle to SoC eFUSE tx_d
+
+  nvmem-cell-names:
+    items:
+      - const: tx_a
+      - const: tx_b
+      - const: tx_c
+      - const: tx_d
+
+required:
+  - compatible
+  - reg
+
+dependentRequired:
+  nvmem-cells: [ nvmem-cell-names ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-idc0ff.0410",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <1>;
+        };
+
+        ethernet-phy@2 {
+            compatible = "ethernet-phy-idc0ff.0410",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <2>;
+
+            nvmem-cells = <&shift_sel_port0_tx_a>,
+                          <&shift_sel_port0_tx_b>,
+                          <&shift_sel_port0_tx_c>,
+                          <&shift_sel_port0_tx_d>;
+            nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
+        };
+    };
-- 
2.53.0