Re: [PATCH 3/4] net: mhi_net: Implement runtime PM support
Mayank Rana <[email protected]>
| Newsgroups | dev.linux.lists.mhi,org.freedesktop.lists.dri-devel,org.infradead.lists.ath11k,org.infradead.lists.ath12k,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-kernel,org.kernel.vger.linux-wireless,org.kernel.vger.netdev |
|---|---|
| Message-ID | <[email protected]> |
+ Chris Do we need to consider updating client driver (net/qrtr/mhi.c) ? Regards, Mayank On 12/1/2025 4:43 AM, Krishna Chaitanya Chundru wrote: > Add runtime power management support to the mhi_net driver to align with > the updated MHI framework, which expects runtime PM to be enabled by client > drivers. This ensures the controller remains active during data transfers > and can autosuspend when idle. > > The driver now uses pm_runtime_get() and pm_runtime_put() around > transmit, receive, and buffer refill operations. Runtime PM is initialized > during probe with autosuspend enabled and a 100ms delay. The device is > marked with pm_runtime_no_callbacks() to notify PM framework that there > are no callbacks for this driver. > > Signed-off-by: Krishna Chaitanya Chundru <[email protected]> > --- > drivers/net/mhi_net.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c > index ae169929a9d8e449b5a427993abf68e8d032fae2..c5c697f29e69e9bc874b6cfff4699de12a4af114 100644 > --- a/drivers/net/mhi_net.c > +++ b/drivers/net/mhi_net.c > @@ -9,6 +9,7 @@ > #include <linux/mod_devicetable.h> > #include <linux/module.h> > #include <linux/netdevice.h> > +#include <linux/pm_runtime.h> > #include <linux/skbuff.h> > #include <linux/u64_stats_sync.h> > > @@ -76,6 +77,7 @@ static netdev_tx_t mhi_ndo_xmit(struct sk_buff *skb, struct net_device *ndev) > struct mhi_device *mdev = mhi_netdev->mdev; > int err; > > + pm_runtime_get(&mdev->dev); > err = mhi_queue_skb(mdev, DMA_TO_DEVICE, skb, skb->len, MHI_EOT); > if (unlikely(err)) { > net_err_ratelimited("%s: Failed to queue TX buf (%d)\n", > @@ -94,6 +96,7 @@ static netdev_tx_t mhi_ndo_xmit(struct sk_buff *skb, struct net_device *ndev) > u64_stats_inc(&mhi_netdev->stats.tx_dropped); > u64_stats_update_end(&mhi_netdev->stats.tx_syncp); > > + pm_runtime_put_autosuspend(&mdev->dev); > return NETDEV_TX_OK; > } > > @@ -261,6 +264,7 @@ static void mhi_net_ul_callback(struct mhi_device *mhi_dev, > } > u64_stats_update_end(&mhi_netdev->stats.tx_syncp); > > + pm_runtime_put_autosuspend(&mdev->dev); > if (netif_queue_stopped(ndev) && !mhi_queue_is_full(mdev, DMA_TO_DEVICE)) > netif_wake_queue(ndev); > } > @@ -277,6 +281,7 @@ static void mhi_net_rx_refill_work(struct work_struct *work) > > size = mhi_netdev->mru ? mhi_netdev->mru : READ_ONCE(ndev->mtu); > > + pm_runtime_get_sync(&mdev->dev); > while (!mhi_queue_is_full(mdev, DMA_FROM_DEVICE)) { > skb = netdev_alloc_skb(ndev, size); > if (unlikely(!skb)) > @@ -296,6 +301,7 @@ static void mhi_net_rx_refill_work(struct work_struct *work) > cond_resched(); > } > > + pm_runtime_put_autosuspend(&mdev->dev); > /* If we're still starved of rx buffers, reschedule later */ > if (mhi_get_free_desc_count(mdev, DMA_FROM_DEVICE) == mhi_netdev->rx_queue_sz) > schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2); > @@ -362,12 +368,19 @@ static int mhi_net_probe(struct mhi_device *mhi_dev, > > SET_NETDEV_DEV(ndev, &mhi_dev->dev); > > + pm_runtime_no_callbacks(&mhi_dev->dev); > + devm_pm_runtime_set_active_enabled(&mhi_dev->dev); > + pm_runtime_set_autosuspend_delay(&mhi_dev->dev, 100); > + pm_runtime_use_autosuspend(&mhi_dev->dev); > + pm_runtime_get(&mhi_dev->dev); > err = mhi_net_newlink(mhi_dev, ndev); > if (err) { > free_netdev(ndev); > + pm_runtime_put_autosuspend(&mhi_dev->dev); > return err; > } > > + pm_runtime_put_autosuspend(&mhi_dev->dev); > return 0; > } > >