[PATCH v6 07/13] gpu: nova-core: gsp: turn FWSEC execution into HAL method

Turn the `run_fwsec_frts` function into a method of `Tu102`. A following
patch will turn the "use FWSEC bootloader" property into a flag of the
TU102 HAL itself, and making this a method will allow the code to access
it instead of querying `Chipset`.

Signed-off-by: Alexandre Courbot <[email protected]>
Reviewed-by: Eliot Courtney <[email protected]>
---
 drivers/gpu/nova-core/gsp/hal/tu102.rs | 173 +++++++++++++++++----------------
 1 file changed, 87 insertions(+), 86 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/hal/tu102.rs b/drivers/gpu/nova-core/gsp/hal/tu102.rs
index c8c7a4f45809..066f97c9908a 100644
--- a/drivers/gpu/nova-core/gsp/hal/tu102.rs
+++ b/drivers/gpu/nova-core/gsp/hal/tu102.rs
@@ -127,94 +127,95 @@ fn run(&self, ctx: &GspBootContext<'_>) -> Result {
     }
 }
 
-/// Helper function to load and run the FWSEC-FRTS firmware and confirm that it has properly
-/// created the WPR2 region.
-fn run_fwsec_frts(
-    dev: &device::Device<device::Bound>,
-    chipset: Chipset,
-    falcon: &Falcon<'_, GspEngine>,
-    bar: Bar0<'_>,
-    bios: &Vbios,
-    fb_layout: &FbLayout,
-) -> Result {
-    // Check that the WPR2 region does not already exist - if it does, we cannot run
-    // FWSEC-FRTS until the GPU is reset.
-    if bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI).higher_bound() != 0 {
-        dev_err!(
-            dev,
-            "WPR2 region already exists - GPU needs to be reset to proceed\n"
-        );
-        return Err(EBUSY);
-    }
-
-    // FWSEC-FRTS will create the WPR2 region.
-    let fwsec_frts = FwsecFirmware::new(
-        dev,
-        falcon,
-        bios,
-        FwsecCommand::Frts {
-            frts_addr: fb_layout.frts.start,
-            frts_size: fb_layout.frts.len(),
-        },
-    )?;
-
-    if chipset.needs_fwsec_bootloader() {
-        let fwsec_frts_bl = FwsecFirmwareWithBl::new(fwsec_frts, dev, chipset)?;
-        // Load and run the bootloader, which will load FWSEC-FRTS and run it.
-        fwsec_frts_bl.run(dev, falcon, bar)?;
-    } else {
-        // Load and run FWSEC-FRTS directly.
-        fwsec_frts.run(dev, falcon)?;
-    }
-
-    // SCRATCH_E contains the error code for FWSEC-FRTS.
-    let frts_status = bar
-        .read(regs::NV_PBUS_SW_SCRATCH_0E_FRTS_ERR)
-        .frts_err_code();
-    if frts_status != 0 {
-        dev_err!(
-            dev,
-            "FWSEC-FRTS returned with error code {:#x}\n",
-            frts_status
-        );
-
-        return Err(EIO);
-    }
-
-    // Check that the WPR2 region has been created as we requested.
-    let (wpr2_lo, wpr2_hi) = (
-        bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_LO).lower_bound(),
-        bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI).higher_bound(),
-    );
-
-    match (wpr2_lo, wpr2_hi) {
-        (_, 0) => {
-            dev_err!(dev, "WPR2 region not created after running FWSEC-FRTS\n");
-
-            Err(EIO)
-        }
-        (wpr2_lo, _) if wpr2_lo != fb_layout.frts.start => {
-            dev_err!(
-                dev,
-                "WPR2 region created at unexpected address {:#x}; expected {:#x}\n",
-                wpr2_lo,
-                fb_layout.frts.start,
-            );
-
-            Err(EIO)
-        }
-        (wpr2_lo, wpr2_hi) => {
-            dev_dbg!(dev, "WPR2: {:#x}-{:#x}\n", wpr2_lo, wpr2_hi);
-            dev_dbg!(dev, "GPU instance built\n");
-
-            Ok(())
-        }
-    }
-}
-
 struct Tu102;
 
 impl Tu102 {
+    /// Helper method to load and run the FWSEC-FRTS firmware and confirm that it has properly
+    /// created the WPR2 region.
+    fn run_fwsec_frts(
+        &self,
+        dev: &device::Device<device::Bound>,
+        chipset: Chipset,
+        falcon: &Falcon<'_, GspEngine>,
+        bar: Bar0<'_>,
+        bios: &Vbios,
+        fb_layout: &FbLayout,
+    ) -> Result {
+        // Check that the WPR2 region does not already exist - if it does, we cannot run
+        // FWSEC-FRTS until the GPU is reset.
+        if bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI).higher_bound() != 0 {
+            dev_err!(
+                dev,
+                "WPR2 region already exists - GPU needs to be reset to proceed\n"
+            );
+            return Err(EBUSY);
+        }
+
+        // FWSEC-FRTS will create the WPR2 region.
+        let fwsec_frts = FwsecFirmware::new(
+            dev,
+            falcon,
+            bios,
+            FwsecCommand::Frts {
+                frts_addr: fb_layout.frts.start,
+                frts_size: fb_layout.frts.len(),
+            },
+        )?;
+
+        if chipset.needs_fwsec_bootloader() {
+            let fwsec_frts_bl = FwsecFirmwareWithBl::new(fwsec_frts, dev, chipset)?;
+            // Load and run the bootloader, which will load FWSEC-FRTS and run it.
+            fwsec_frts_bl.run(dev, falcon, bar)?;
+        } else {
+            // Load and run FWSEC-FRTS directly.
+            fwsec_frts.run(dev, falcon)?;
+        }
+
+        // SCRATCH_E contains the error code for FWSEC-FRTS.
+        let frts_status = bar
+            .read(regs::NV_PBUS_SW_SCRATCH_0E_FRTS_ERR)
+            .frts_err_code();
+        if frts_status != 0 {
+            dev_err!(
+                dev,
+                "FWSEC-FRTS returned with error code {:#x}\n",
+                frts_status
+            );
+
+            return Err(EIO);
+        }
+
+        // Check that the WPR2 region has been created as we requested.
+        let (wpr2_lo, wpr2_hi) = (
+            bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_LO).lower_bound(),
+            bar.read(regs::NV_PFB_PRI_MMU_WPR2_ADDR_HI).higher_bound(),
+        );
+
+        match (wpr2_lo, wpr2_hi) {
+            (_, 0) => {
+                dev_err!(dev, "WPR2 region not created after running FWSEC-FRTS\n");
+
+                Err(EIO)
+            }
+            (wpr2_lo, _) if wpr2_lo != fb_layout.frts.start => {
+                dev_err!(
+                    dev,
+                    "WPR2 region created at unexpected address {:#x}; expected {:#x}\n",
+                    wpr2_lo,
+                    fb_layout.frts.start,
+                );
+
+                Err(EIO)
+            }
+            (wpr2_lo, wpr2_hi) => {
+                dev_dbg!(dev, "WPR2: {:#x}-{:#x}\n", wpr2_lo, wpr2_hi);
+                dev_dbg!(dev, "GPU instance built\n");
+
+                Ok(())
+            }
+        }
+    }
+
     /// Load and prepare the resources required to properly reset the GSP after it has been stopped.
     fn build_unload_bundle(
         &self,
@@ -284,7 +285,7 @@ fn boot(
 
         // FWSEC-FRTS is not executed on chips where the FRTS region size is 0 (e.g. GA100).
         if !fb_layout.frts.is_empty() {
-            run_fwsec_frts(dev, chipset, gsp_falcon, bar, &bios, fb_layout)?;
+            self.run_fwsec_frts(dev, chipset, gsp_falcon, bar, &bios, fb_layout)?;
         }
 
         gsp_falcon.reset()?;

-- 
2.55.0