Re: [PATCH 20/27] gpu: nova-core: handle the r000 load-and-execute bootloader event

On Tue, 18 Aug 2026 20:52:13 -0700
John Hubbard <[email protected]> wrote:

snip

> +    /// Handle a `GSP_LOAD_EXEC_GENERIC_BOOTLOADER` event.
> +    ///
> +    /// The driver does not copy the image the GSP asks for. It
> writes the descriptor the event
> +    /// carries to DMEM offset 0, places the generic bootloader in
> IMEM, points the requested FBIF
> +    /// aperture at wherever the image lives, and runs the
> bootloader, which does the copy from
> +    /// the descriptor and jumps to the image. The aperture is
> restored afterwards.
> +    ///
> +    /// # Errors
> +    ///
> +    /// - `EINVAL` if the payload is shorter than the parameter
> block, the descriptor is not the
> +    ///   size this driver mirrors, or the event names a context DMA
> slot or an aperture that does
> +    ///   not exist.
> +    /// - `ETIMEDOUT` if the GSP does not suspend, or the image does
> not halt, in time.
> +    #[expect(dead_code)]
> +    #[allow(clippy::too_many_arguments)]
> +    fn handle_load_exec_bootloader(
> +        payload: &[u8],
> +        bootloader: &GenericBootloader,
> +        gsp_falcon: &Falcon<'_, Gsp>,
> +        sec2_falcon: &Falcon<'_, Sec2>,
> +        bar: Bar0<'_>,
> +        dev: &device::Device,
> +        bootloader_app_version: u32,
> +        libos_dma_handle: u64,
> +    ) -> Result {
> +        let params =
> LoadExecGenericBootloaderParams::from_bytes_prefix(payload)
> +            .ok_or(EINVAL)?
> +            .0;
> +
> +        let desc_size =
> +
> u32::try_from(core::mem::size_of::<BootloaderDmemDescV2>()).map_err(|_|
> EOVERFLOW)?;
> +        if params.dmem_desc_size != desc_size {
> +            dev_err!(
> +                dev,
> +                "Load-exec descriptor is {} bytes, expected {}\n",
> +                params.dmem_desc_size,
> +                desc_size
> +            );
> +            return Err(EINVAL);
> +        }
> +
> +        let ctx_dma = params.ctx_dma()?;
> +        let fbif_target = params.fbif_target()?;
> +        let transcfg = || {
> +            regs::NV_PFALCON_FBIF_TRANSCFG::of::<Gsp>()
> +                .try_at(usize::from(ctx_dma))
> +                .ok_or(EINVAL)
> +        };
> +
> +        gsp_falcon.wait_for_processor_suspend().inspect_err(|_| {
> +            dev_err!(
> +                dev,
> +                "Timeout waiting for GSP suspend (mbox0={:#x})\n",
> +                gsp_falcon.read_mailbox0()
> +            );
> +        })?;
> +
> +        gsp_falcon.reset()?;
> +        gsp_falcon.dma_reset();
> +
> +        let saved_transcfg = bar.read(transcfg()?);
> +        bar.update(transcfg()?, |v| {
> +            v.with_target(fbif_target)
> +                .with_mem_type(FalconFbifMemType::Physical)
> +        });
> +
> +        let run = (|| -> Result {
> +
> gsp_falcon.pio_load(&bootloader.with_descriptor(&params.dmem_desc))?;
> +
> +            // Also clears the suspend bit that
> `wait_for_processor_suspend` polls, so the next
> +            // load-and-execute event does not read this one's
> suspension.
> +
> gsp_falcon.write_mailboxes(Some(FLCN_ERR_BINARY_NOT_STARTED), None); +
> +            gsp_falcon.start()?;
> +            gsp_falcon.wait_till_halted().inspect_err(|_| {
> +                dev_err!(
> +                    dev,
> +                    "Timeout waiting for the loaded image to halt
> (mbox0={:#x})\n",
> +                    gsp_falcon.read_mailbox0()
> +                );
> +            })
> +        })();
> +
> +        bar.update(transcfg()?, |_| saved_transcfg);
> +        run?;

TRANSCFG was restored only when the transfer is successful in OpenRM [1]
(also r000 firmware), I think that is reasonable since if the HALT is
not received, the controller is in stale and might still be active on
memory read/write until it got reset.

I guess we should follow OpenRM's scheme, e.g.

run?;
bar.update(xxxx);

[1]
https://github.com/NVIDIA/open-gpu-kernel-modules/blob/main/src/nvidia/src/kernel/gpu/gsp/arch/turing/kernel_gsp_falcon_tu102.c#L556

> +
> +        Self::core_resume(
> +            gsp_falcon,
> +            sec2_falcon,
> +            dev,
> +            bootloader_app_version,
> +            libos_dma_handle,
> +        )
> +    }
> +
>      /// Handle a `GSP_LOAD_EXEC_HS_BINARY` event.
>      ///
>      /// The GSP asks the driver to run a high-security binary that
> it has already placed in the @@ -347,6 +448,64 @@ pub(crate) fn
> unload( /// points it at local framebuffer.
>  const HS_BINARY_CTX_DMA: u8 = 0;
>  
> +/// Number of FBIF context DMA slots a falcon has.
> +const NUM_CTX_DMA: usize = 8;
> +
> +/// Parameters for loading and executing the generic bootloader.
> +///
> +/// Sent by GSP-RM as the payload of
> `GSP_LOAD_EXEC_GENERIC_BOOTLOADER`. The descriptor carries +/// the
> code and data addresses, while `addr_space` and `cpu_cache_attrib`
> say which FBIF aperture +/// reaches them. +#[repr(C)]
> +struct LoadExecGenericBootloaderParams {
> +    dmem_desc: BootloaderDmemDescV2,
> +    dmem_desc_size: u32,
> +    addr_space: u32,
> +    cpu_cache_attrib: u32,
> +    _reserved: [u32; 4],
> +}
> +
> +impl LoadExecGenericBootloaderParams {
> +    const ADDR_SYSMEM: u32 = 1;
> +    const ADDR_FBMEM: u32 = 2;
> +    const NV_MEMORY_CACHED: u32 = 0;
> +    const NV_MEMORY_UNCACHED: u32 = 1;
> +
> +    /// Returns the context DMA slot the bootloader is to fetch the
> image through.
> +    ///
> +    /// # Errors
> +    ///
> +    /// - `EINVAL` if the slot is outside the FBIF `TRANSCFG` array.
> +    fn ctx_dma(&self) -> Result<u8> {
> +        let ctx_dma = self.dmem_desc.ctx_dma;
> +
> +        u8::try_from(ctx_dma)
> +            .ok()
> +            .filter(|slot| usize::from(*slot) < NUM_CTX_DMA)
> +            .ok_or(EINVAL)
> +    }
> +
> +    /// Returns the FBIF aperture that reaches the image.
> +    ///
> +    /// # Errors
> +    ///
> +    /// - `EINVAL` if the address space and cache attribute pair is
> not one this driver maps.
> +    fn fbif_target(&self) -> Result<FalconFbifTarget> {
> +        match (self.addr_space, self.cpu_cache_attrib) {
> +            (Self::ADDR_FBMEM, _) => Ok(FalconFbifTarget::LocalFb),
> +            (Self::ADDR_SYSMEM, Self::NV_MEMORY_CACHED) =>
> Ok(FalconFbifTarget::CoherentSysmem),
> +            (Self::ADDR_SYSMEM, Self::NV_MEMORY_UNCACHED) => {
> +                Ok(FalconFbifTarget::NoncoherentSysmem)
> +            }
> +            _ => Err(EINVAL),
> +        }
> +    }
> +}
> +
> +// SAFETY: The nested descriptor is `FromBytes`, and every other
> field is an integer type for +// which all bit patterns are valid.
> +unsafe impl FromBytes for LoadExecGenericBootloaderParams {}
> +
>  /// Parameters for loading and executing an HS (High-Security)
> binary. ///
>  /// Sent by GSP-RM as the payload of `GSP_LOAD_EXEC_HS_BINARY`. The
> firmware