[PATCH v12 1/8] cxl/mbox: Flag support for Dynamic Capacity Devices (DCD)

Anisa Su <[email protected]> Fri, 31 Jul 2026 01:48:06 -0700
Newsgroups dev.linux.lists.nvdimm,org.kernel.vger.linux-cxl,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
From: Ira Weiny <[email protected]>

Per the CXL 4.0 specification software must check the Command Effects
Log (CEL) for dynamic capacity command support.

Detect support for the DCD commands while reading the CEL, including:

        Get DC Config
        Get DC Extent List
        Add DC Response
        Release DC

Based on an original patch by Navneet Singh.

Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Anisa Su <[email protected]>
Tested-by: Wonjae Lee <[email protected]>
Tested-by: Junhee Park <[email protected]>
Tested-by: Heesoo Kim <[email protected]>

---
Changes:
1. mbox.c: leave mds->dcd_supported false so the hardware enablement
   patches can be upstreamed ahead of the extent and DAX work; the
   event handling patch re-enables it.
---
 drivers/cxl/core/mbox.c | 44 +++++++++++++++++++++++++++++++++++++++++
 drivers/cxl/cxlmem.h    | 20 +++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 7c6c5b7450a5..4790524c32a7 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -165,6 +165,38 @@ static void cxl_set_security_cmd_enabled(struct cxl_security_state *security,
 	}
 }
 
+static bool cxl_is_dcd_command(u16 opcode)
+{
+#define CXL_MBOX_OP_DCD_CMDS 0x48
+
+	return (opcode >> 8) == CXL_MBOX_OP_DCD_CMDS;
+}
+
+static void cxl_set_dcd_cmd_enabled(u16 opcode, unsigned long *cmd_mask)
+{
+	switch (opcode) {
+	case CXL_MBOX_OP_GET_DC_CONFIG:
+		set_bit(CXL_DCD_ENABLED_GET_CONFIG, cmd_mask);
+		break;
+	case CXL_MBOX_OP_GET_DC_EXTENT_LIST:
+		set_bit(CXL_DCD_ENABLED_GET_EXTENT_LIST, cmd_mask);
+		break;
+	case CXL_MBOX_OP_ADD_DC_RESPONSE:
+		set_bit(CXL_DCD_ENABLED_ADD_RESPONSE, cmd_mask);
+		break;
+	case CXL_MBOX_OP_RELEASE_DC:
+		set_bit(CXL_DCD_ENABLED_RELEASE, cmd_mask);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool cxl_verify_dcd_cmds(unsigned long *cmds_seen)
+{
+	return bitmap_full(cmds_seen, CXL_DCD_ENABLED_MAX);
+}
+
 static bool cxl_is_poison_command(u16 opcode)
 {
 #define CXL_MBOX_OP_POISON_CMDS 0x43
@@ -757,6 +789,7 @@ static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel)
 	struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
 	struct cxl_cel_entry *cel_entry;
 	const int cel_entries = size / sizeof(*cel_entry);
+	DECLARE_BITMAP(dcd_cmds, CXL_DCD_ENABLED_MAX) = {};
 	struct device *dev = mds->cxlds.dev;
 	int i, ro_cmds = 0, wr_cmds = 0;
 
@@ -785,11 +818,22 @@ static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel)
 			enabled++;
 		}
 
+		if (cxl_is_dcd_command(opcode)) {
+			cxl_set_dcd_cmd_enabled(opcode, dcd_cmds);
+			enabled++;
+		}
+
 		dev_dbg(dev, "Opcode 0x%04x %s\n", opcode,
 			enabled ? "enabled" : "unsupported by driver");
 	}
 
 	set_features_cap(cxl_mbox, ro_cmds, wr_cmds);
+	/*
+	 * Disabled until event handling implemented.
+	 */
+	if (cxl_verify_dcd_cmds(dcd_cmds))
+		dev_dbg(dev, "Device supports DCD; capability disabled\n");
+	mds->dcd_supported = false;
 }
 
 static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_memdev_state *mds)
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index ed419d0c59f2..616eeaeee5b9 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -252,6 +252,20 @@ struct cxl_event_state {
 	struct mutex log_lock;
 };
 
+/**
+ * CXL r4.0 Section 8.2.10.9 - Memory Device Command Sets. See Table 8-308.
+ *
+ * The 48h Command Set (Opcodes 4800h - 4803h) defines the device-enabled DCD
+ * commands.
+ */
+enum dcd_cmd_enabled_bits {
+	CXL_DCD_ENABLED_GET_CONFIG,
+	CXL_DCD_ENABLED_GET_EXTENT_LIST,
+	CXL_DCD_ENABLED_ADD_RESPONSE,
+	CXL_DCD_ENABLED_RELEASE,
+	CXL_DCD_ENABLED_MAX
+};
+
 /* Device enabled poison commands */
 enum poison_cmd_enabled_bits {
 	CXL_POISON_ENABLED_LIST,
@@ -427,6 +441,7 @@ static inline struct cxl_dev_state *mbox_to_cxlds(struct cxl_mailbox *cxl_mbox)
  * @partition_align_bytes: alignment size for partition-able capacity
  * @active_volatile_bytes: sum of hard + soft volatile
  * @active_persistent_bytes: sum of hard + soft persistent
+ * @dcd_supported: all DCD commands are supported
  * @event: event log driver state
  * @poison: poison driver state info
  * @security: security driver state info
@@ -446,6 +461,7 @@ struct cxl_memdev_state {
 	u64 partition_align_bytes;
 	u64 active_volatile_bytes;
 	u64 active_persistent_bytes;
+	bool dcd_supported;
 
 	struct cxl_event_state event;
 	struct cxl_poison_state poison;
@@ -507,6 +523,10 @@ enum cxl_opcode {
 	CXL_MBOX_OP_UNLOCK		= 0x4503,
 	CXL_MBOX_OP_FREEZE_SECURITY	= 0x4504,
 	CXL_MBOX_OP_PASSPHRASE_SECURE_ERASE	= 0x4505,
+	CXL_MBOX_OP_GET_DC_CONFIG	= 0x4800,
+	CXL_MBOX_OP_GET_DC_EXTENT_LIST	= 0x4801,
+	CXL_MBOX_OP_ADD_DC_RESPONSE	= 0x4802,
+	CXL_MBOX_OP_RELEASE_DC		= 0x4803,
 	CXL_MBOX_OP_MAX			= 0x10000
 };
 
-- 
2.43.0