Re: [PATCH v2 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: add ST21NFCD NFC

On 19/08/2026 23:09, Kristian Brox wrote:
> Enable the ST21NFCD on i2c9 (0x08), IRQ TLMM 41, reset TLMM 38
> active-high. Compatible is st,st21nfcd (raw NCI).
> 
> SYS_CLK is LN_BB_CLK2. VPS_IO is L18B (vreg_l18b). ese-present and
> uicc-present follow the public schematic (NFC_SWP1/SWP2: SWP_SE to
> SIM1, SWP_UICC to SIM2). Reader path is tested; SE/HCE is not.
> 
> Signed-off-by: Kristian Brox <[email protected]>
> ---
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 29d6265..394237c 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -1004,7 +1004,23 @@
>   &i2c9 {
>   	status = "okay";
>   
> -	/* ST21NFC NFC @ 28 */
> +	nfc@8 {
> +		compatible = "st,st21nfcd";
> +		reg = <0x08>;
> +
> +		interrupts-extended = <&tlmm 41 IRQ_TYPE_LEVEL_HIGH>;
> +		reset-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
> +
> +		pinctrl-0 = <&nfc_int_default>, <&nfc_reset_default>;
> +		pinctrl-names = "default";
> +
> +		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
> +		vdd-io-supply = <&vreg_l18b>;
> +
> +		ese-present;
> +		uicc-present;
> +	};
> +
>   	/* VL53L3 ToF @ 29 */
>   };
>   
> @@ -1649,6 +1665,21 @@
>   		drive-strength = <2>;
>   		bias-pull-up;
>   	};
> +
> +	nfc_int_default: nfc-int-default-state {
> +		pins = "gpio41";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +
> +	nfc_reset_default: nfc-reset-default-state {
> +		pins = "gpio38";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +		output-high;
> +	};

Sort by pins property here. As a bonus, you can group these into something like:

nfc_default: nfc-default-state {
     reset-pins {}
     int-pins {}
}

this will make referencing the group here cleaner.

I think the output-high shouldn't be needed, as driver should take about setting 
the low/high as needed.

David

>   };
>   
>   &uart5 {
>