[PATCH v3 1/3] dt-bindings: net: nfc: add st,st21nfcd

Kristian Brox <[email protected]>
Newsgroups dev.linux.lists.oe-linux-nfc,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.netdev
Message-ID <[email protected]>
Add a compatible for the ST ST21NFCD NFC controller. Document optional
SYS_CLK (clocks) and VPS_IO (vdd-io-supply), and add an I2C example
that uses interrupts-extended.

Signed-off-by: Kristian Brox <[email protected]>
---
 .../devicetree/bindings/net/nfc/st,st-nci.yaml     | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
index 1dcbddbc5..c859797f4 100644
--- a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -15,6 +15,7 @@ properties:
       - st,st21nfcb-i2c
       - st,st21nfcb-spi
       - st,st21nfcc-i2c
+      - st,st21nfcd
 
   reset-gpios:
     description: Output GPIO pin used for resetting the controller
@@ -36,6 +37,15 @@ properties:
       Specifies that the uicc swp signal can be physically connected to the
       controller
 
+  clocks:
+    maxItems: 1
+    description:
+      External reference clock connected to SYS_CLK.
+
+  vdd-io-supply:
+    description:
+      Digital I/O supply (VPS_IO).
+
 required:
   - compatible
   - interrupts
@@ -49,6 +59,7 @@ if:
         enum:
           - st,st21nfcb-i2c
           - st,st21nfcc-i2c
+          - st,st21nfcd
 then:
   properties:
     spi-max-frequency: false
@@ -81,6 +92,26 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "st,st21nfcd";
+            reg = <0x08>;
+
+            interrupts-extended = <&gpio5 2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&clk>;
+            vdd-io-supply = <&vdd_io>;
+        };
+    };
+
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>

-- 
2.55.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.