Re: [PATCH v3 0/3] nfc: st-nci: Fairphone 5 NFC bring-up (ST21NFCD)

On 20/08/2026 22:56, Kristian Brox wrote:
> This adds NFC on the Fairphone 5 (qcm6490). The board uses an ST21NFCD
> on I2C. That part speaks raw NCI; the current st-nci driver always
> wraps NDLC, so using st,st21nfcb-i2c leaves the adapter unusable.
> 
> The series adds a st,st21nfcd compatible for the raw-NCI path and the
> Fairphone 5 DT node. Boards that already use st21nfcb / st21nfcc keep
> the NDLC path.
> 
> Patches are against linux-nfc/for-next (v7.2-rc7). Hardware test was on
> a Fairphone 5 running postmarketOS, with these changes as modules on a
> 7.1.2 sc7280 kernel:
> 
> - nfctool: Powered: Yes
> - initiator poll / neard: NTAG 215, NDEF URI read OK
> 
> ese-present and uicc-present follow the public schematic (NFC_SWP1/SWP2:
> SWP_SE to SIM1, SWP_UICC to SIM2). SE/HCE is not tested.
> 
> CLK_REQ (GPIO 39) is omitted, as on Fairphone 6 NFC. VBAT and VDD_TX sit
> on VPH_PWR and are not modelled. VCC_UICC_IN (L4C) is not modelled;
> UICC SWP is untested.
> 
> To/Cc from scripts/get_maintainer.pl via b4 prep --auto-to-cc on this tree.

Still not. I do not believe you did it. You either run these on
different tree, or have some commits interfering like changing
maintainers, or did not actually run it, because you still miss all of
the DT maintainers.

Best regards,
Krzysztof