Re: [Printing-architecture] PAPPL 1.2rc1 (Supply levels)

Michael Sweet <[email protected]> Sun, 15 May 2022 17:22:18 -0400

Newsgroups	dev.linux.lists.printing-architecture
Message-ID	<[email protected]>

Till,

Try the dnssd and snmp URIs with these commands and post the results.


> On May 15, 2022, at 3:46 PM, Till Kamppeter <[email protected]> wrote:
> 
> Seems that ink level query on my printer is supported:
> 
> ----------
> $ testsuite/testpappl --get-id socket://192.168.68.101
> 
> MFG:HP;MDL:HP OfficeJet Pro 8730;
> 
> $ testsuite/testpappl --get-status socket://192.168.68.101
> 
> none
> 
> $ testsuite/testpappl --get-supplies socket://192.168.68.101
> 
>                      cyan ink HP N9H71A: 54% (ink, cyan)
> 
>                   magenta ink HP N9H75A: 58% (ink, magenta)
> 
>                    yellow ink HP N9H79A: 60% (ink, yellow)
> 
>                     black ink HP N9H83A: 79% (ink, black)
> 
> $
> ----------
> 
> What else could go wrong here?
> 
> I have tested with the original network backends (schemes, devices) of PAPPL, both the one with DNS-Sd discovery and the one with SNMP discovery, and even with them I get only the gauge.
> 
>   Till
> 
> 
> On 15/05/2022 21:37, Michael Sweet wrote:
>> The "testpappl" program provided with PAPPL can be used to test the SNMP stuff:
>>     git clone https://github.com/michaelrsweet/pappl.git
>>     cd pappl
>>     ./configure
>>     make
>>     testsuite/testpappl --get-id socket://IP-ADDRESS
>>     testsuite/testpappl --get-status socket://IP-ADDRESS
>>     testsuite/testpappl --get-supplies socket://IP-ADDRESS
> 

________________________
Michael Sweet

signature.asc (application/pgp-signature, 833 B)