Re: [REGRESSION] mainline/master: Apalis iMX6 no longer boots

On Tue, Aug 11, 2026 at 12:47:18AM +0000, Hongxing Zhu (OSS) wrote:
> > -----Original Message-----
> > From: Leonardo Costa <[email protected]>
> > Sent: Tuesday, August 11, 2026 2:26 AM
> > To: Hongxing Zhu (OSS) <[email protected]>
> > Cc: Bjorn Helgaas <[email protected]>; [email protected];
> > [email protected]; [email protected]; Frank Li <[email protected]>;
> > [email protected]; [email protected]; [email protected];
> > [email protected]; [email protected];
> > [email protected]; [email protected]; linux-
> > [email protected]; [email protected]; Sherry Sun
> > <[email protected]>; Manivannan Sadhasivam <[email protected]>;
> > Hongxing Zhu <[email protected]>; [email protected]
> > Subject: Re: [REGRESSION] mainline/master: Apalis iMX6 no longer boots
> > 
> > On Thu, Jul 16, 2026 at 02:09:19PM -0300, Leonardo Costa wrote:
> > > On Thu, Jul 16, 2026 at 02:15:42AM +0000, Hongxing Zhu (OSS) wrote:
> > > > Hi Leonardo,
> > > >
> > > > Would you be able to test this patch on your affected boards? Your
> > > > testing would help expedite the merge process and ensure the fix
> > > > resolves the boot issue you're experiencing.
> > > >
> > > > Best Regards
> > > > Richard Zhu
> > >
> > > Hi Richard,
> > >
> > > Sorry for taking long to respond, I was caught up with something. I
> > > tested the patch and it solved the issue. I sent a Tested-by tag there.
> > > Thanks for looking into this!
> > >
> > > Best Regards
> > > Leonardo
> > 
> > Hi Richard,
> > 
> > That patch might have introduced/exposed a second regression where PCI
> > devices are not linked properly during the initialization. Sorry for not catching
> > this before, as I didn't have any device connected during the previous test.
> Hi Leonardo:
> Sorry to hear about that.
> I did test commit 7678e81498e2 with one Intel NIC (82574L) connected, and I've
> double-checked today based on v7.2-rc7. The PCIe link can be set up properly
> on the i.MX6Q Sabresd board in my testing.
> 
> Here are the logs:
> root@imx6qpdlsolox:~# lspci
> 00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
> 01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
> root@imx6qpdlsolox:~# uname -a
> Linux imx6qpdlsolox 7.2.0-rc7 #30 SMP Tue Aug 11 00:21:26 UTC 2026 armv7l GNU/Linux
> root@imx6qpdlsolox:~# dmesg | grep pci
> [    0.256138] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
> [    0.256307] imx6q-pcie 1ffc000.pcie:       IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
> [    0.256339] imx6q-pcie 1ffc000.pcie:      MEM 0x0001000000..0x0001efffff -> 0x0001000000
> [    0.256434] imx6q-pcie 1ffc000.pcie: config reg[1] 0x01f00000 == cpu 0x01f00000
> [    0.458388] imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
> [    0.458492] imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled
> [    0.555294] imx6q-pcie 1ffc000.pcie: PCIe Gen.1 x1 link up
> [    0.555783] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
> ...
> 
> The following endpoint devices also yielded the same results.
> root@imx6qpdlsolox:~# lspci
> 00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
> 01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
> root@imx6qpdlsolox:~# uname -a
> Linux imx6qpdlsolox 7.2.0-rc7 #30 SMP Tue Aug 11 00:21:26 UTC 2026 armv7l GNU/Linux
> ...
> 
> root@imx6qpdlsolox:~# lspci
> 00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
> 01:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
> root@imx6qpdlsolox:~# uname -a
> Linux imx6qpdlsolox 7.2.0-rc7 #30 SMP Tue Aug 11 00:21:26 UTC 2026 armv7l GNU/Linux
> 
> Could you provide more details of your hardware setup (board, connected
> devices, PERST# present or not)?
> This may help us identify if there's a specific scenario that triggers the
> regression you're experiencing.

It's an apalis imx6, as reported already in this email thread.
The DT is in Linux, you can check
arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts every details
about PERST# and more.

This is the device connected:

00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
01:00.0 SATA controller: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller (rev 02)

01:00.0 SATA controller: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASMedia Technology Inc. ASM1061/ASM1062 Serial ATA Controller
	Flags: bus master, fast devsel, latency 0, IRQ 308
	I/O ports at 1020 [size=8]
	I/O ports at 1030 [size=4]
	I/O ports at 1028 [size=8]
	I/O ports at 1034 [size=4]
	I/O ports at 1000 [size=32]
	Memory at 01100000 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at 01200000 [virtual] [disabled] [size=64K]
	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [78] Power Management version 3
	Capabilities: [80] Express Legacy Endpoint, IntMsgNum 0
	Capabilities: [100] Virtual Channel
	Kernel driver in use: ahci
	Kernel modules: ahci


These are some working logs from a 6.6.151 kernel

[    0.233058] imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
[    0.233112] imx6q-pcie 1ffc000.pcie:       IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
[    0.233144] imx6q-pcie 1ffc000.pcie:      MEM 0x0001000000..0x0001efffff -> 0x0001000000
[    0.465779] imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
[    0.564230] imx6q-pcie 1ffc000.pcie: PCIe Gen.1 x1 link up
[    0.564249] imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled
[    0.564259] imx6q-pcie 1ffc000.pcie: Link up, Gen1
[    0.564272] imx6q-pcie 1ffc000.pcie: PCIe Gen.1 x1 link up
[    0.564778] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[    0.564795] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.564809] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.564821] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[    0.564864] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[    0.564886] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[    0.564905] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.564917] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.564931] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    0.564943] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    0.564957] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    0.565405] pci 0000:00:00.0: Limiting cfg_size to 512
[    0.565455] pci 0000:00:00.0: supports D1
[    0.565465] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.574310] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    0.574458] pci 0000:01:00.0: BAR 0 [io  0x0000-0x0007]
[    0.574541] pci 0000:01:00.0: BAR 1 [io  0x0000-0x0003]
[    0.574616] pci 0000:01:00.0: BAR 2 [io  0x0000-0x0007]
[    0.574774] pci 0000:01:00.0: BAR 3 [io  0x0000-0x0003]
[    0.574854] pci 0000:01:00.0: BAR 4 [io  0x0000-0x001f]
[    0.574925] pci 0000:01:00.0: BAR 5 [mem 0x00000000-0x000001ff]
[    0.575001] pci 0000:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.575765] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.576808] pci 0000:00:00.0: BAR 0 [mem 0x01000000-0x010fffff]: assigned
[    0.576860] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]: assigned
[    0.576895] pci 0000:00:00.0: bridge window [mem 0x01200000-0x012fffff pref]: assigned
[    0.576928] pci 0000:00:00.0: ROM [mem 0x01300000-0x0130ffff pref]: assigned
[    0.576958] pci 0000:00:00.0: bridge window [io  0x1000-0x1fff]: assigned
[    0.577000] pci 0000:01:00.0: ROM [mem 0x01200000-0x0120ffff pref]: assigned
[    0.577033] pci 0000:01:00.0: BAR 5 [mem 0x01100000-0x011001ff]: assigned
[    0.577087] pci 0000:01:00.0: BAR 4 [io  0x1000-0x101f]: assigned
[    0.577212] pci 0000:01:00.0: BAR 0 [io  0x1020-0x1027]: assigned
[    0.577273] pci 0000:01:00.0: BAR 2 [io  0x1028-0x102f]: assigned
[    0.577326] pci 0000:01:00.0: BAR 1 [io  0x1030-0x1033]: assigned
[    0.577377] pci 0000:01:00.0: BAR 3 [io  0x1034-0x1037]: assigned
[    0.577429] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.577460] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    0.577491] pci 0000:00:00.0:   bridge window [mem 0x01100000-0x011fffff]
[    0.577520] pci 0000:00:00.0:   bridge window [mem 0x01200000-0x012fffff pref]
[    0.579109] pcieport 0000:00:00.0: PME: Signaling with IRQ 291
[    0.580323] pcieport 0000:00:00.0: AER: enabled with IRQ 291