Re: [PATCH 04/10] dt-bindings: pinctrl: add Ambarella CV75 pinctrl
"Rob Herring (Arm)" <[email protected]> Thu, 30 Jul 2026 07:42:47 -0500
| Newsgroups | dev.linux.lists.soc,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-gpio,org.kernel.vger.linux-kernel,org.kernel.vger.linux-serial |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 30 Jul 2026 18:43:24 +0800, Long Zhao wrote: > Add the CV75 pin controller binding and pinmux ID header. > > Signed-off-by: Long Zhao <[email protected]> > --- > .../pinctrl/ambarella,cv75-pinctrl.yaml | 167 ++++++++++++++++++ > .../dt-bindings/pinctrl/ambarella,pinctrl.h | 11 ++ > 2 files changed, 178 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/ambarella,cv75-pinctrl.yaml > create mode 100644 include/dt-bindings/pinctrl/ambarella,pinctrl.h > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/mediatek/mediatek,mt8196-tdshp.example.dtb: tdshp@321e0000 (mediatek,mt8196-disp-tdshp): 'clock-names' is a required property from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8196-tdshp.yaml Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.example.dtb: display0: fsl,pcr: b'\xf0\xc8\x80\x80' is not of type 'object', 'integer', 'array', 'boolean', 'null' from schema $id: http://devicetree.org/schemas/dt-core.yaml Documentation/devicetree/bindings/clock/ambarella,cv75-rct.example.dtb: / (ambarella,cv75-evk): 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml doc reference errors (make refcheckdocs): See https://patchwork.kernel.org/project/devicetree/patch/[email protected] The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.