[PATCH v2 4/4] riscv: dts: sophgo: Enable SPI NOR node for SG2042_EVB_V2
Zixian Zeng <[email protected]>
| Newsgroups | dev.linux.lists.sophgo,org.infradead.lists.linux-riscv,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Enable SPI NOR node for SG2042_EVB_V2 device tree According to SG2042_EVB_V2 schematic, SPI-NOR Flash cannot support QSPI due to hardware design. Thus spi-(tx|rx)-bus-width must be set to 1. Signed-off-by: Han Gao <[email protected]> Signed-off-by: Zixian Zeng <[email protected]> --- arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts b/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts index 46980e41b886ce17dacce791fa5f2cef14cfa214..78460b2851a231a3e06b28f9ac6bffd4700e7dab 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts +++ b/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts @@ -226,6 +226,18 @@ &sd { status = "okay"; }; +&spifmc1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + &uart0 { pinctrl-0 = <&uart0_cfg>; pinctrl-names = "default"; -- 2.51.0