Re: [PATCH 0/3] Add initial Milk-V Duo S board support

Hi, Joshua,

You should add "v2" in the title of this patchset, pleaes run git 
format-patch with "-v 2".

Please do this in next v3.

Thanks,

Chen

On 10/11/2025 9:48 AM, Joshua Milas wrote:
> This adds an initial device tree for the Milk-V Duo S board
> with support for reading from the SD card and network over
> ethernet. This is continued work from Michael Opdenacker's
> v6 series [1] on the ARM64 and RISCV side. It has been tested
> with both ARM64 and RISCV64.
>
> ---
>
> v2
> - Made new entry in docs to avoid DTC check error
> - "Milk-V DuoS" -> "Milk-V Duo S"
> - Sorting of aliases
> - Added uart*, emmc, mdio, gmac0, i2c*, spi*, dmac, saradc
>    to device tree matching what is available on the pinout [2]
>    and available in the device tree includes
> - Removal of 'no-mmc' and 'no-sdio' for sdhci0 as it works
>    without
> - Added riscv device tree
>
> Link: https://lore.kernel.org/linux-riscv/[email protected]/ [1]
> Link: https://milkv.io/duo-s/duos-pinout.webp [2]
>
> Joshua Milas (3):
>    dt-bindings: soc: sophgo: add Milk-V Duo S board compatibles
>    arm64: dts: sophgo: add initial Milk-V Duo S board support
>    riscv64: dts: sophgo: add initial Milk-V Duo S board support
>
>   .../bindings/soc/sophgo/sophgo.yaml           |   5 +
>   arch/arm64/boot/dts/sophgo/Makefile           |   1 +
>   .../boot/dts/sophgo/sg2000-milkv-duo-s.dts    | 110 ++++++++++++++++++
>   arch/riscv/boot/dts/sophgo/Makefile           |   1 +
>   .../boot/dts/sophgo/cv1812h-milkv-duo-s.dts   | 110 ++++++++++++++++++
>   5 files changed, 227 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-s.dts
>   create mode 100644 arch/riscv/boot/dts/sophgo/cv1812h-milkv-duo-s.dts
>
>
> base-commit: 0251a1deaec78252cb311fc8305d3670bc5eee0e