[PATCH v3 11/13] riscv: dts: Add initial Anlogic DR1V90 SoC device tree

DR1V90 is a FPSoC from Anlogic, which features a RISC-V core as the PS
part and 94,464 LUTs for the PL part.

The PS part integrates a Nuclei UX900 RISC-V core with 32KB L1 icache
and 32KB L1 dcache. It also provides two "snps,dw-apb-uart" compatible
UART controllers.

Some basic information of the processor can be obtained by running a
simple application from nuclei-sdk [1]:

-----Nuclei RISC-V CPU Configuration Information-----
         MARCHID: 0xc900
          MIMPID: 0x20300
             ISA: RV64 A B C D F I M P S U
            MCFG: TEE ECC ECLIC PLIC PPI ILM DLM ICACHE DCACHE IREGION No-Safety-Mechanism DLEN=VLEN/2
             ILM: 256 KB has-ecc
             DLM: 256 KB has-ecc
          ICACHE: 32 KB(set=256,way=2,lsize=64,ecc=1)
          DCACHE: 32 KB(set=256,way=2,lsize=64,ecc=1)
             TLB: MainTLB(set=32,way=2,entry=1,ecc=1) ITLB(entry=8) DTLB(entry=8)
         IREGION: 0x68000000 128 MB
                  Unit        Size        Address
                  INFO        64KB        0x68000000
                  DEBUG       64KB        0x68010000
                  ECLIC       64KB        0x68020000
                  TIMER       64KB        0x68030000
                  PLIC        64MB        0x6c000000
     INFO-Detail:
                  mpasize : 0
             PPI: 0xf8000000 128 MB
-----End of Nuclei CPU INFO-----

Link: https://github.com/Nuclei-Software/nuclei-sdk/blob/master/application/baremetal/cpuinfo/main.c [1]
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Junhui Liu <[email protected]>
---
 arch/riscv/boot/dts/anlogic/dr1v90.dtsi | 100 ++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/riscv/boot/dts/anlogic/dr1v90.dtsi b/arch/riscv/boot/dts/anlogic/dr1v90.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a5d0765ade3231ece0afbe8835d95cd918a44ad9
--- /dev/null
+++ b/arch/riscv/boot/dts/anlogic/dr1v90.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Junhui Liu <[email protected]>
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Anlogic DR1V90";
+	compatible = "anlogic,dr1v90";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <800000000>;
+
+		cpu@0 {
+			compatible = "nuclei,ux900", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <256>;
+			d-cache-size = <32768>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <256>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			reg = <0>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zba", "zbb", "zbc",
+					       "zbkc", "zbs", "zicntr", "zicsr", "zifencei",
+					       "zihintpause", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aclint_mswi: interrupt-controller@68031000 {
+			compatible = "anlogic,dr1v90-aclint-mswi", "nuclei,ux900-aclint-mswi";
+			reg = <0x0 0x68031000 0x0 0x4000>;
+			interrupts-extended = <&cpu0_intc 3>;
+		};
+
+		aclint_mtimer: timer@68035000 {
+			compatible = "anlogic,dr1v90-aclint-mtimer", "nuclei,ux900-aclint-mtimer";
+			reg = <0x0 0x68035000 0x0 0x8000>;
+			reg-names = "mtimecmp";
+			interrupts-extended = <&cpu0_intc 7>;
+		};
+
+		aclint_sswi: interrupt-controller@6803d000 {
+			compatible = "anlogic,dr1v90-aclint-sswi", "nuclei,ux900-aclint-sswi";
+			reg = <0x0 0x6803d000 0x0 0x3000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 1>;
+		};
+
+		plic: interrupt-controller@6c000000 {
+			compatible = "anlogic,dr1v90-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0x6c000000 0x0 0x4000000>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			riscv,ndev = <150>;
+		};
+
+		uart0: serial@f8400000 {
+			compatible = "anlogic,dr1v90-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xf8400000 0x0 0x1000>;
+			clock-frequency = <50000000>;
+			interrupts = <71>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@f8401000 {
+			compatible = "anlogic,dr1v90-uart", "snps,dw-apb-uart";
+			reg = <0x0 0xf8401000 0x0 0x1000>;
+			clock-frequency = <50000000>;
+			interrupts = <72>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+	};
+};

-- 
2.51.1