Re: [PATCH v3 00/13] riscv: Add initial support for Anlogic DR1V90

Thomas,

On Tue, Oct 28, 2025 at 07:39:07PM +0000, Conor Dooley wrote:
> Thomas, Junhui,
> 
> On Tue, Oct 21, 2025 at 05:41:35PM +0800, Junhui Liu wrote:
> > This introduces initial support for the Anlogic DR1V90 SoC [1] and the
> > Milianke MLKPAI-FS01 [2] board.
> > 
> > The DR1V90 is a RISC-V based FPSoC from Anlogic, featuring a Nuclei
> > UX900 [3] core as its processing system (PS) and 94,464 LUTs in the
> > programmable logic (PL) part. The Milianke MLKPAI-FS01 board is one of
> > the first platforms based on this SoC, with UART1 routed to a Type-C
> > interface for console access.
> > 
> > Tested on the Milianke MLKPAI-FS01 board with both the vendor's OpenSBI
> > and the not-yet-upstreamed mainline OpenSBI [4], as well as the vendor’s
> > U-Boot. Because the vendor’s OpenSBI is loaded at 0x1f300000, we have
> > to additionally reserve the DRAM region 0x1fe00000–0x1fffffff to prevent
> > overlap if using vendor's OpenSBI.
> > 
> > Link: https://www.anlogic.com/product/fpga/saldragon/dr1 [1]
> > Link: https://www.milianke.com/product-item-104.html [2]
> > Link: https://nucleisys.com/product/900.php [3]
> > Link: https://github.com/pigmoral/opensbi/tree/dr1v90 [4]
> > ---
> > Changes in v3:
> > - Update DT binding to use ACLINT instead of CLINT
> > - Drop MAINTAINERS patch
> > - Rebase on v6.18-rc1
> > - Link to v2: https://lore.kernel.org/r/[email protected]
> > 
> > Changes in v2:
> > - Add MAINTAINERS entry for the DR1V90 platform
> > - Remove the riscv,isa property of cpu and reorder propertyies
> > - Fix clint base address in the dtsi
> > - Change the memory node to cover the full 512MB RAM in board dts
> > - Link to v1: https://lore.kernel.org/r/[email protected]
> > 
> > ---
> > Junhui Liu (13):
> >       dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
> >       dt-bindings: riscv: Add Nuclei UX900 compatibles
> >       dt-bindings: riscv: Add Anlogic DR1V90
> >       dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
> >       dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
> >       dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
> >       dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
> >       dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
> >       irqchip/aclint-sswi: Add Nuclei UX900 support
> 
> I'm happy enough with this series to grab it, but while I don't mind
> taking some trivial binding changes with it, I don't want to take an
> irqchip driver patch. Would you be able to apply the irqchip stuff
> Thomas?


Could you pick up 4-6 and 9 here please?

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaQzWjgAKCRB4tDGHoIJi
0pjLAP4i3LKjrcugZ1SHa8IN8d1ahJjzKig/a42m3C3BLhx/6AD8CjGNPrqdnGjb
X9OAq+b6bdQXfUDl2Y1epPRbb3x1AwE=
=g1P8
-----END PGP SIGNATURE-----