[PATCH net-next 06/11] net: stmmac: move initialisation of unicast_filter_entries to stmmac_plat_dat_alloc()

Move the default initialisation of plat_dat->unicast_filter_entries to
1 to stmmac_plat_dat_alloc(). This means platform glue only needs to
override this if different.

Signed-off-by: Russell King (Oracle) <[email protected]>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c     | 6 ------
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c  | 3 ---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c    | 1 -
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 2 ++
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c      | 6 ------
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 ---
 6 files changed, 2 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index a4ef3ec070e2..de07cca2e625 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -570,9 +570,6 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 
 	plat->mdio_bus_data->needs_reset = true;
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	/* Set default number of RX and TX queues to use */
 	plat->tx_queues_to_use = 1;
 	plat->rx_queues_to_use = 1;
@@ -700,9 +697,6 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 
 	plat->ptp_clk_freq_config = intel_mgbe_ptp_clk_freq_config;
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	plat->flags |= STMMAC_FLAG_VLAN_FAIL_Q_EN;
 
 	/* Use the last Rx queue */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index cfdda9e82a19..99b2d2deaceb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -98,9 +98,6 @@ static void loongson_default_data(struct pci_dev *pdev,
 	/* Increase the default value for multicast hash bins */
 	plat->multicast_filter_bins = 256;
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	/* Disable Priority config by default */
 	plat->tx_queues_cfg[0].use_prio = false;
 	plat->rx_queues_cfg[0].use_prio = false;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c
index 3b7947a7a7ba..24ce17ea35c4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c
@@ -24,7 +24,6 @@ static int sophgo_sg2044_dwmac_init(struct platform_device *pdev,
 	plat_dat->flags |= STMMAC_FLAG_SPH_DISABLE;
 	plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
 	plat_dat->multicast_filter_bins = 0;
-	plat_dat->unicast_filter_entries = 1;
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a7393a3e792f..1d12835d14ce 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7568,11 +7568,13 @@ struct plat_stmmacenet_data *stmmac_plat_dat_alloc(struct device *dev)
 	 * - determine GMII_Address CR field from CSR clock
 	 * - allow MTU up to JUMBO_LEN
 	 * - hash table size
+	 * - one unicast filter entry
 	 */
 	plat_dat->phy_addr = -1;
 	plat_dat->clk_csr = -1;
 	plat_dat->maxmtu = JUMBO_LEN;
 	plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+	plat_dat->unicast_filter_entries = 1;
 
 	return plat_dat;
 }
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 0c65b24480ae..aea615e76dac 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -28,9 +28,6 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 
 	plat->mdio_bus_data->needs_reset = true;
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	/* Set default number of RX and TX queues to use */
 	plat->tx_queues_to_use = 1;
 	plat->rx_queues_to_use = 1;
@@ -75,9 +72,6 @@ static int snps_gmac5_default_data(struct pci_dev *pdev,
 	plat->flags |= STMMAC_FLAG_TSO_EN;
 	plat->pmt = 1;
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	/* Set default number of RX and TX queues to use */
 	plat->tx_queues_to_use = 4;
 	plat->rx_queues_to_use = 4;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 9982aaa19519..314cb3e720fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -508,9 +508,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 		plat->flags |= STMMAC_FLAG_EN_TX_LPI_CLOCKGATING;
 	}
 
-	/* Set default value for unicast filter entries */
-	plat->unicast_filter_entries = 1;
-
 	/*
 	 * Currently only the properties needed on SPEAr600
 	 * are provided. All other properties should be added
-- 
2.47.3