[PATCH net-next 11/11] net: stmmac: remove unnecessary .pkt_route queue initialisation

PCI drivers explicitly set .pkt_route to zero. However, as the struct
is allocated using devm_kzalloc(), all members default to zero unless
explicitly initialised. Thus, explicitly setting these to zero is
unnecessary. Remove these. This leaves only stmmac_platform.c where
this is explicitly initialised depending on DT properties.

$ grep '\.pkt_route =' *.c
dwmac-intel.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
dwmac-intel.c: plat->rx_queues_cfg[i].pkt_route = 0x0;
dwmac-loongson.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
stmmac_main.c: if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
stmmac_pci.c: plat->rx_queues_cfg[0].pkt_route = 0x0;
stmmac_pci.c: plat->rx_queues_cfg[i].pkt_route = 0x0;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
stmmac_platform.c: plat->rx_queues_cfg[queue].pkt_route = 0x0;

Signed-off-by: Russell King (Oracle) <[email protected]>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c     | 9 +--------
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c  | 3 ---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c      | 7 +------
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 --
 4 files changed, 2 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 72f6acde544f..8938e7a59925 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -569,9 +569,6 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 	plat->force_sf_dma_mode = 1;
 
 	plat->mdio_bus_data->needs_reset = true;
-
-	/* Disable RX queues routing by default */
-	plat->rx_queues_cfg[0].pkt_route = 0x0;
 }
 
 static struct phylink_pcs *intel_mgbe_select_pcs(struct stmmac_priv *priv,
@@ -612,13 +609,9 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 
 	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
 
-	for (i = 0; i < plat->rx_queues_to_use; i++) {
+	for (i = 0; i < plat->rx_queues_to_use; i++)
 		plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
 
-		/* Disable RX queues routing by default */
-		plat->rx_queues_cfg[i].pkt_route = 0x0;
-	}
-
 	for (i = 0; i < plat->tx_queues_to_use; i++) {
 		plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index c64a24bb060f..5f9472f47e35 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -98,9 +98,6 @@ static void loongson_default_data(struct pci_dev *pdev,
 	/* Increase the default value for multicast hash bins */
 	plat->multicast_filter_bins = 256;
 
-	/* Disable RX queues routing by default */
-	plat->rx_queues_cfg[0].pkt_route = 0x0;
-
 	plat->clk_ref_rate = 125000000;
 	plat->clk_ptp_rate = 125000000;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 2f45b7986903..2fd4660838bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -27,9 +27,6 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 	plat->force_sf_dma_mode = 1;
 
 	plat->mdio_bus_data->needs_reset = true;
-
-	/* Disable RX queues routing by default */
-	plat->rx_queues_cfg[0].pkt_route = 0x0;
 }
 
 static int stmmac_default_data(struct pci_dev *pdev,
@@ -77,10 +74,8 @@ static int snps_gmac5_default_data(struct pci_dev *pdev,
 	}
 
 	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
-	for (i = 0; i < plat->rx_queues_to_use; i++) {
+	for (i = 0; i < plat->rx_queues_to_use; i++)
 		plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
-		plat->rx_queues_cfg[i].pkt_route = 0x0;
-	}
 
 	plat->bus_id = 1;
 	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index e769638586fe..1fefa6c55db1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -196,8 +196,6 @@ static int stmmac_mtl_setup(struct platform_device *pdev,
 			plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
 		else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
 			plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
-		else
-			plat->rx_queues_cfg[queue].pkt_route = 0x0;
 
 		queue++;
 	}
-- 
2.47.3