[PATCH] spi: sophgo: Fix incorrect use of bus width value macros

The previous code initialized the 'reg' value with specific bus-width
values (BUS_WIDTH_2_BIT and BUS_WIDTH_4_BIT), which introduces ambiguity.
Replace them with BUS_WIDTH_MASK to express the intention clearly.

Fixes: de16c322eefb ("spi: sophgo: add SG2044 SPI NOR controller driver")
Signed-off-by: Longbin Li <[email protected]>
---
 drivers/spi/spi-sg2044-nor.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-sg2044-nor.c b/drivers/spi/spi-sg2044-nor.c
index af48b1fcda93..37f1cfe10be4 100644
--- a/drivers/spi/spi-sg2044-nor.c
+++ b/drivers/spi/spi-sg2044-nor.c
@@ -42,6 +42,7 @@
 #define SPIFMC_TRAN_CSR_TRAN_MODE_RX		BIT(0)
 #define SPIFMC_TRAN_CSR_TRAN_MODE_TX		BIT(1)
 #define SPIFMC_TRAN_CSR_FAST_MODE		BIT(3)
+#define SPIFMC_TRAN_CSR_BUS_WIDTH_MASK		GENMASK(5, 4)
 #define SPIFMC_TRAN_CSR_BUS_WIDTH_1_BIT		(0x00 << 4)
 #define SPIFMC_TRAN_CSR_BUS_WIDTH_2_BIT		(0x01 << 4)
 #define SPIFMC_TRAN_CSR_BUS_WIDTH_4_BIT		(0x02 << 4)
@@ -122,8 +123,7 @@ static u32 sg2044_spifmc_init_reg(struct sg2044_spifmc *spifmc)
 	reg = readl(spifmc->io_base + SPIFMC_TRAN_CSR);
 	reg &= ~(SPIFMC_TRAN_CSR_TRAN_MODE_MASK |
 		 SPIFMC_TRAN_CSR_FAST_MODE |
-		 SPIFMC_TRAN_CSR_BUS_WIDTH_2_BIT |
-		 SPIFMC_TRAN_CSR_BUS_WIDTH_4_BIT |
+		 SPIFMC_TRAN_CSR_BUS_WIDTH_MASK |
 		 SPIFMC_TRAN_CSR_DMA_EN |
 		 SPIFMC_TRAN_CSR_ADDR_BYTES_MASK |
 		 SPIFMC_TRAN_CSR_WITH_CMD |
--
2.51.2