[PATCH v5 RESEND 5/5] riscv64: dts: sophgo: add initial Milk-V Duo S board support

This adds initial riscv support for the Milk-V Duo S board
[1] making it possible to boot Linux to the command line.

Link: https://milkv.io/duo-s [1]

Signed-off-by: Joshua Milas <[email protected]>
---
 arch/riscv/boot/dts/sophgo/Makefile           |  1 +
 .../boot/dts/sophgo/sg2000-milkv-duo-s.dts    | 85 +++++++++++++++++++
 2 files changed, 86 insertions(+)
 create mode 100644 arch/riscv/boot/dts/sophgo/sg2000-milkv-duo-s.dts

diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
index 6f65526d4193b..58cc6b70d8de4 100644
--- a/arch/riscv/boot/dts/sophgo/Makefile
+++ b/arch/riscv/boot/dts/sophgo/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duo-s.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-evb-v1.dtb
diff --git a/arch/riscv/boot/dts/sophgo/sg2000-milkv-duo-s.dts b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duo-s.dts
new file mode 100644
index 0000000000000..8632470f43ab0
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/sg2000-milkv-duo-s.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "sg2000.dtsi"
+
+/ {
+	model = "Milk-V Duo S";
+	compatible = "milkv,duo-s", "sophgo,sg2000";
+
+	aliases {
+		i2c4 = &i2c4;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		spi3 = &spi3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&dmac {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <4>;
+	no-1-8-v;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	no-1-8-v;
+	disable-wp;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&spi3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
-- 
2.53.0