Re: [PATCH v5 RESEND 0/5] Add initial Milk-V Duo S board support
Inochi Amaoto <[email protected]> Sun, 31 May 2026 06:02:38 +0800
| Newsgroups | dev.linux.lists.sophgo,org.infradead.lists.linux-riscv,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Sat, May 30, 2026 at 01:33:42PM -0400, Joshua Milas wrote: > This adds an initial device tree for the Milk-V Duo S board > with support for reading from the SD card and network over > Ethernet. This is continued work from Michael Opdenacker's > v6 series [1] on the ARM64 and RISCV side. It has been tested > with ARM64 and RISCV64 to boot from an SD card, have networking, > and read I2C slave devices over i2c4. > > --- > > v5 > - Fixes spaces at beginning of line in &usb node of DTS > > v4: https://lore.kernel.org/sophgo/[email protected]/ > - Rebased to latest sophogo/for-next > - Added usb node to arm64 and riscv DTS > - Removed sg200x link in commit messages > - Added missing change to v3 and removed link from v2 > > v3: https://lore.kernel.org/sophgo/[email protected]/ > - Added sg2000 interrupt controller and timer to documentation > - Added sg2000.dtsi for RISCV and moved DTS over to use it > - remove devices from DTS's to match what is available in the > default pinmux config. spi0-2, i2c0-3, uart1-4 > - Added i2c4 and spi3 aliases > - Removed milkv,duo-s from sophgo,cv1812h in documentation > > v2: https://lore.kernel.org/sophgo/[email protected]/ > - Made new entry in docs to avoid DTC error > - "Milk-V DuoS" -> "Milk-V Duo S" > - Sorting of aliases > - Added uart*, emmc, mdio, gmac0, i2c*, spi*, dmac, saradc > to device tree matching what is available on the pinout > - Removal of 'no-mmc' and 'no-sdio' for sdhci0 as it works without > - Added riscv device tree > > v1: https://lore.kernel.org/sophgo/[email protected]/ > > Link: https://lore.kernel.org/linux-riscv/[email protected]/ [1] > > Joshua Milas (5): > dt-bindings: soc: sophgo: add Milk-V Duo S board compatibles > arm64: dts: sophgo: add initial Milk-V Duo S board support > dt-bindings: soc: sophgo: add sg2000 plic and clint documentation > riscv64: dts: sophgo: add SG2000 dtsi > riscv64: dts: sophgo: add initial Milk-V Duo S board support > > .../sifive,plic-1.0.0.yaml | 1 + > .../bindings/soc/sophgo/sophgo.yaml | 4 + > .../bindings/timer/sifive,clint.yaml | 1 + > arch/arm64/boot/dts/sophgo/Makefile | 1 + > .../boot/dts/sophgo/sg2000-milkv-duo-s.dts | 85 +++++++++++++++++++ > arch/riscv/boot/dts/sophgo/Makefile | 1 + > .../boot/dts/sophgo/sg2000-milkv-duo-s.dts | 85 +++++++++++++++++++ > arch/riscv/boot/dts/sophgo/sg2000.dtsi | 53 ++++++++++++ > 8 files changed, 231 insertions(+) > create mode 100644 arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-s.dts > create mode 100644 arch/riscv/boot/dts/sophgo/sg2000-milkv-duo-s.dts > create mode 100644 arch/riscv/boot/dts/sophgo/sg2000.dtsi > > > base-commit: 9aa6068586a9b4cd34cf04f8dee72a7283ab4ae4 > -- > 2.53.0 > You resend drop all the tags, always send a new version with all tags applied in this case. Regards, Inochi