[PATCH v2] riscv: dts: spacemit: k1-orangepi-rv2: Add cpu scaling

Enable CPU DVFS on OrangePi RV2

Signed-off-by: Vincent Legoll <[email protected]>
---
Tested on a 2GB RAM OrangePi RV2 board, patch applied over
spacemit/for-next + Shuwei Wu's V3 series.

On Void linux (musl libc):

uname -a
Linux opirv2 7.1.0-rc1-00043-gb860bca13be4 #14 SMP PREEMPT Sat Jun 13 
11:02:13 CEST 2026 riscv64 GNU/Linux

awk --version | head -1
GNU Awk 5.3.2, API 4.0

echo userspace > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor

echo 1600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
time awk 'BEGIN{for(i=0;i<1000000;i++){}}'
real    0m0.300s
user    0m0.299s
sys     0m0.001s

echo 1228800 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
time awk 'BEGIN{for(i=0;i<1000000;i++){}}'
real    0m0.432s
user    0m0.429s
sys     0m0.004s

echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
time awk 'BEGIN{for(i=0;i<1000000;i++){}}'
real    0m0.476s
user    0m0.476s
sys     0m0.001s

echo 819000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
time awk 'BEGIN{for(i=0;i<1000000;i++){}}'
real    0m0.582s
user    0m0.581s
sys     0m0.001s

echo 614400 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
time awk 'BEGIN{for(i=0;i<1000000;i++){}}'
real    0m0.778s
user    0m0.773s
sys     0m0.005s

Changes in v2:
- Fix indentation with TABs
Feedback from Yixun Lan (dlan)
- sort includes in alphabetical order
- use b4
- Link to v1: https://patch.msgid.link/[email protected]
---
 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts | 35 +++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
index 7c49bce427f3..2c2542e02d6a 100644
--- a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "k1.dtsi"
+#include "k1-opp.dtsi"
 #include "k1-pinctrl.dtsi"
 
 / {
@@ -80,6 +81,38 @@ &combo_phy {
 	status = "okay";
 };
 
+&cpu_0 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_1 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_2 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_3 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_4 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_5 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_6 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_7 {
+	cpu-supply = <&buck1_0v9>;
+};
+
 &emmc {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
@@ -162,7 +195,7 @@ pmic@41 {
 		dldoin2-supply = <&buck5>;
 
 		regulators {
-			buck1 {
+			buck1_0v9: buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3450000>;
 				regulator-ramp-delay = <5000>;

---
base-commit: 32cb211965ea0ba0ab8568959f006c7fa10e9f23
change-id: 20260615-k1-cpufreq-orangepi-rv2-5ece985163cd

Best regards,
--  
Vincent Legoll <[email protected]>