Re: [PATCH 1/5] riscv: dts: spacemit: set console baud rate on K3 Pico-ITX board
Guodong Xu <[email protected]>
| Newsgroups | dev.linux.lists.spacemit,org.infradead.lists.linux-riscv,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <oktm3eodc7xk3cdvxtjudycofa2rgddczh77zz5neef5w2mzzd@sh46luoxt2ln> |
Hi Aurelien,
On 2026-06-20 08:22, Aurelien Jarno wrote:
>Because the default console's baud rate is not set, defconfig kernels do
>not have any serial output on this platform. Set the baud rate to
>115200, matching what is used by U-Boot etc on this platform.
>
>Fixes: 7a6131804986 ("riscv: dts: spacemit: add K3 Pico-ITX board support")
>Signed-off-by: Aurelien Jarno <[email protected]>
Thanks for the patch.
Reviewed-by: Guodong Xu <[email protected]>
>---
> arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>index b89c1521e6649..509cebc0c9568 100644
>--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>@@ -18,7 +18,7 @@ aliases {
> };
>
> chosen {
>- stdout-path = "serial0";
>+ stdout-path = "serial0:115200n8";
> };
>
> memory@100000000 {
>--
>2.53.0
>
>
>_______________________________________________
>linux-riscv mailing list
>[email protected]
>http://lists.infradead.org/mailman/listinfo/linux-riscv