[PATCH net v2 1/2] net: stmmac: dwmac-spacemit: Fix wrong phy interface definition
Inochi Amaoto <[email protected]>
| Newsgroups | dev.linux.lists.spacemit,org.infradead.lists.linux-arm-kernel,org.infradead.lists.linux-riscv,org.kernel.vger.linux-kernel,org.kernel.vger.netdev |
|---|---|
| Message-ID | <[email protected]> |
The current MII interface register definition from the vendor is wrong,
use the right number for the macro. Also, correct the interface mask
in spacemit_set_phy_intf_sel() so it can update the register with the
right number
Fixes: 30f0ba420ed3 ("net: stmmac: Add glue layer for Spacemit K3 SoC")
Signed-off-by: Inochi Amaoto <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
index 223754cc5c79..3bfb6d49be6c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
@@ -18,8 +18,10 @@
#include "stmmac_platform.h"
/* ctrl register bits */
-#define CTRL_PHY_INTF_RGMII BIT(3)
-#define CTRL_PHY_INTF_MII BIT(4)
+#define CTRL_PHY_INTF_MODE GENMASK(4, 3)
+#define CTRL_PHY_INTF_RMII FIELD_PREP(CTRL_PHY_INTF_MODE, 0)
+#define CTRL_PHY_INTF_RGMII FIELD_PREP(CTRL_PHY_INTF_MODE, 1)
+#define CTRL_PHY_INTF_MII FIELD_PREP(CTRL_PHY_INTF_MODE, 3)
#define CTRL_WAKE_IRQ_EN BIT(9)
#define CTRL_PHY_IRQ_EN BIT(12)
@@ -118,7 +120,7 @@ static void spacemit_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
{
- unsigned int mask = CTRL_PHY_INTF_MII | CTRL_PHY_INTF_RGMII;
+ unsigned int mask = CTRL_PHY_INTF_MODE;
struct spacmit_dwmac *dwmac = bsp_priv;
unsigned int val = 0;
@@ -128,6 +130,7 @@ static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
break;
case PHY_INTF_SEL_RMII:
+ val = CTRL_PHY_INTF_RMII;
break;
case PHY_INTF_SEL_RGMII:
--
2.54.0