[PATCH v2 1/5] riscv: dts: spacemit: set console baud rate on K3 Pico-ITX board
Aurelien Jarno <[email protected]>
| Newsgroups | dev.linux.lists.spacemit,org.infradead.lists.linux-riscv,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Because the default console's baud rate is not set, defconfig kernels do
not have any serial output on this platform. Set the baud rate to
115200, matching what is used by U-Boot etc on this platform.
Fixes: 7a6131804986 ("riscv: dts: spacemit: add K3 Pico-ITX board support")
Signed-off-by: Aurelien Jarno <[email protected]>
Reviewed-by: Guodong Xu <[email protected]>
---
arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
v2:
- Collect Reviewed-by tag
diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
index b89c1521e6649..509cebc0c9568 100644
--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
@@ -18,7 +18,7 @@ aliases {
};
chosen {
- stdout-path = "serial0";
+ stdout-path = "serial0:115200n8";
};
memory@100000000 {
--
2.53.0