[PATCH v4 5/6] dt-bindings: PCI: spacemit: Introduce Spacemit K3 PCIe host controller

Add binding support for the PCIe controller on the SpacemiT K3 SoC.
This controller is almost a standard Synopsys DesignWare PCIe IP,
with some extra link and reset state control.

Signed-off-by: Inochi Amaoto <[email protected]>
---
 .../bindings/pci/spacemit,k1-pcie-host.yaml   | 50 ++++++++++++++++---
 1 file changed, 43 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml
index c4c00b5fcdc0..54817d6fd9af 100644
--- a/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml
@@ -14,26 +14,29 @@ description: >
   PCIe IP.  The controller uses the DesignWare built-in MSI interrupt
   controller, and supports 256 MSIs.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
-
 properties:
   compatible:
-    const: spacemit,k1-pcie
+    enum:
+      - spacemit,k1-pcie
+      - spacemit,k3-pcie
 
   reg:
+    minItems: 4
     items:
       - description: DesignWare PCIe registers
       - description: ATU address space
       - description: PCIe configuration space
       - description: Link control registers
+      - description: Data Bus Interface (DBI) shadow registers.
 
   reg-names:
+    minItems: 4
     items:
       - const: dbi
       - const: atu
       - const: config
       - const: link
+      - const: dbi2
 
   clocks:
     items:
@@ -66,6 +69,8 @@ properties:
   interrupt-names:
     const: msi
 
+  msi-parent: true
+
   spacemit,apmu:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
@@ -84,7 +89,8 @@ patternProperties:
 
     properties:
       phys:
-        maxItems: 1
+        minItems: 1
+        maxItems: 6
 
       vpcie3v3-supply:
         description:
@@ -96,13 +102,43 @@ patternProperties:
 
     unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: spacemit,k1-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+
+        reg-names:
+          maxItems: 4
+
+      patternProperties:
+        '^pcie@':
+          properties:
+            phys:
+              maxItems: 1
+
+      required:
+        - interrupts
+        - interrupt-names
+    else:
+      properties:
+        reg:
+          minItems: 5
+
+        reg-names:
+          minItems: 5
+
 required:
   - clocks
   - clock-names
   - resets
   - reset-names
-  - interrupts
-  - interrupt-names
   - spacemit,apmu
 
 unevaluatedProperties: false
-- 
2.55.0