Re: [PATCH 3/3] riscv: dts: spacemit: k3: Add UFS support

On 2026-07-02 02:31, Yixun Lan wrote:
> Add UFS Host Controller support for SpacemiT K3 SoC, and enable
> it both on both Pico-ITX and CoM260-IFX boards.
> 
> Signed-off-by: Yixun Lan <[email protected]>
> ---
>  arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts |  4 ++++
>  arch/riscv/boot/dts/spacemit/k3-pico-itx.dts   |  4 ++++
>  arch/riscv/boot/dts/spacemit/k3.dtsi           | 13 +++++++++++++
>  3 files changed, 21 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
> index 238bb03d0e9e..b37e1c7b03e3 100644
> --- a/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
> +++ b/arch/riscv/boot/dts/spacemit/k3-com260-ifx.dts
> @@ -19,3 +19,7 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  };
> +
> +&ufshc {
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> index b89c1521e664..f1560a5a9031 100644
> --- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> +++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
> @@ -221,3 +221,7 @@ hub@1 {
>  &usb2_phy {
>  	status = "okay";
>  };
> +
> +&ufshc {
> +	status = "okay";
> +};

I guess you want to keep the nodes sorted and put it before usb2_host. Anyway:

Tested-by: Aurelien Jarno <[email protected]>

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
[email protected]                     http://aurel32.net