Re: [PATCH RESEND 08/17] drm/spacemit: add Saturn DPU core types, cmdlist and display MMU
Philipp Zabel <[email protected]> Mon, 27 Jul 2026 09:35:35 +0200
| Newsgroups | dev.linux.lists.spacemit,org.infradead.lists.linux-phy,org.infradead.lists.linux-riscv,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On Sa, 2026-07-25 at 00:51 -0400, Cody Kang via B4 Relay wrote: > From: Cody Kang <[email protected]> >=20 > Register programming of the Saturn DPU is batched: the driver builds > per-module register lists in memory and the hardware command-list > engine replays them at frame boundaries, while scanout buffers are > mapped through the DPU's private address translation unit (DMMU) > rather than scanned out by physical address. >=20 > Add the shared driver types, the MMIO field accessors, the trace > events, the command-list builder and the DMMU table code. Some DPU > configuration registers are write-only, so a read-modify-write would > corrupt neighbouring fields; byte- and halfword-aligned fields are > therefore written at their native width instead. >=20 > Signed-off-by: Cody Kang <[email protected]> > --- > drivers/gpu/drm/spacemit/dpu/dpu_saturn.h | 35 +++ > drivers/gpu/drm/spacemit/dpu/dpu_trace.h | 350 ++++++++++++++++++++++= ++++++ > drivers/gpu/drm/spacemit/spacemit_cmdlist.c | 304 ++++++++++++++++++++++= ++ > drivers/gpu/drm/spacemit/spacemit_cmdlist.h | 146 ++++++++++++ > drivers/gpu/drm/spacemit/spacemit_crtc.h | 259 ++++++++++++++++++++ > drivers/gpu/drm/spacemit/spacemit_dmmu.c | 103 ++++++++ > drivers/gpu/drm/spacemit/spacemit_dmmu.h | 40 ++++ > drivers/gpu/drm/spacemit/spacemit_dpu_reg.h | 108 +++++++++ > drivers/gpu/drm/spacemit/spacemit_drm.h | 68 ++++++ > 9 files changed, 1413 insertions(+) >=20 [...] > diff --git a/drivers/gpu/drm/spacemit/spacemit_cmdlist.h b/drivers/gpu/dr= m/spacemit/spacemit_cmdlist.h > new file mode 100644 > index 000000000000..d5acdbeb3b0e > --- /dev/null > +++ b/drivers/gpu/drm/spacemit/spacemit_cmdlist.h > @@ -0,0 +1,146 @@ [...] > +struct spacemit_crtc { > + struct device *dev; > + struct drm_crtc crtc; > + const struct dpu_core_ops *core; > + struct dpu_mmu_tbl mmu_tbl; > + int dev_id; > + int irq_online; > + struct timer_list cfg_rdy_timer; > + > + bool is_1st_f; > + bool first_modeset; > + struct dpu_clk_context clk_ctx; > + u32 aclk; > + u32 out_format; > + > + struct reset_control *mclk_reset; > + struct reset_control *lcd_reset; > + struct reset_control *esc_reset; > + struct reset_control *aclk_reset; > + struct reset_control *dsc_reset; Why are these duplicated from spacemit_drm_private? dpu_pm_suspend/resume() in patch 10 have access to priv. regards Philipp