[moderation/CI] Re: mm/mglru: frequency guided promotion (MGLRU-FG) and flag cleanup

syzbot ci has tested the following series

[v1] mm/mglru: frequency guided promotion (MGLRU-FG) and flag cleanup
https://lore.kernel.org/all/[email protected]
* [PATCH RFC 01/15] mm/memcontrol: make lru_zone_size atomic and simplify s=
anity check
* [PATCH RFC 02/15] mm/memcontrol: allow update of LRU statistic without ho=
lding LRU lock
* [PATCH RFC 03/15] mm/mglru: introduce and always use helpers for manipula=
ting page flags
* [PATCH RFC 04/15] mm/mglru: make generation page counters atomic
* [PATCH RFC 05/15] mm/mglru: move max_seq read into walk_update_folio
* [PATCH RFC 06/15] mm/mglru: use explicit tier range in read_ctrl_pos()
* [PATCH RFC 07/15] mm/mglru: move refault workingset activation into lru_g=
en_refault
* [PATCH RFC 08/15] mm/memcg: add folio-based lruvec live helper
* [PATCH RFC 09/15] mm/mglru: frequency guided workingset promotion (MGLRU-=
FG)
* [PATCH RFC 10/15] mm/mglru: make folio lru referenced times count a gener=
ic API
* [PATCH RFC 11/15] mm/mglru: replace folio workinset check and update with=
 new helper
* [PATCH RFC 12/15] mm/smap: report workingset folios as referenced
* [PATCH RFC 13/15] mm/huge_memory: mark file folio as accessed more accura=
tely on split
* [PATCH RFC 14/15] mm/khugepaged: consider workingset folios as referenced
* [PATCH RFC 15/15] mm/madvise: convert to new lru refs API and better supp=
ort for MGLRU

and found the following issue:
WARNING in folio_inc_lru_refs

Full report is available here:
https://ci.syzbot.org/series/5db36d1d-9faa-4882-9f0d-1a8f52132274

***

WARNING in folio_inc_lru_refs

tree:      mm-new
URL:       https://kernel.googlesource.com/pub/scm/linux/kernel/git/akpm/mm=
.git
base:      94f9b3980dd446b56acf1dfed649e9b32a9f3813
arch:      amd64
compiler:  Debian clang version 22.1.8 (++20260613092233+e80beda6e255-1~exp=
1~20260613092250.77), Debian LLD 22.1.8
config:    https://ci.syzbot.org/builds/9f324367-2b95-4fd0-9025-fef1ff1f605=
a/config

page: refcount:3 mapcount:2 mapping:0000000000000000 index:0x0 pfn:0xe4ee
flags: 0xfff00000002000(reserved|node=3D0|zone=3D1|lastcpupid=3D0x7ff)
raw: 00fff00000002000 ffffea0000393b88 ffffea0000393b88 0000000000000000
raw: 0000000000000000 0000000000000000 0000000300000001 0000000000000000
page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled()=
)
page_owner info is not present (never set?)
------------[ cut here ]------------
1
WARNING: ./include/linux/memcontrol.h:745 at folio_inc_lru_refs+0xb4f/0xc10=
, CPU#0: mount/5025
Modules linked in:
CPU: 0 UID: 0 PID: 5025 Comm: mount Not tainted syzkaller #0 PREEMPT(full)=
=20
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16=
.2-1 04/01/2014
RIP: 0010:folio_inc_lru_refs+0xb4f/0xc10
Code: ff 4c 89 e7 e8 c2 ae fd ff e9 e9 fc ff ff e8 18 91 ba ff 4c 89 e7 48 =
c7 c6 20 90 f8 8b e8 99 b0 1b ff c6 05 a6 a9 34 0e 01 90 <0f> 0b 90 e9 85 f=
6 ff ff e8 f4 90 ba ff e9 29 f8 ff ff 44 89 f1 80
RSP: 0018:ffffc9000324f4c0 EFLAGS: 00010246
RAX: 8e914a919570c700 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff8e4b4187 RDI: ffff888174f53c00
RBP: ffffc9000324f5d0 R08: 0000000000000003 R09: 0000000000000004
R10: dffffc0000000000 R11: fffffbfff1d3ca24 R12: ffffea0000393b80
R13: 1ffffd4000072770 R14: 1ffff92000649ea8 R15: dffffc0000000000
FS:  0000000000000000(0000) GS:ffff88818d949000(0000) knlGS:000000000000000=
0
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb77b215440 CR3: 000000000e946000 CR4: 00000000000006f0
Call Trace:
 <TASK>
 __zap_vma_range+0x20f5/0x4f70
 unmap_vmas+0x390/0x550
 exit_mmap+0x293/0x9f0
 __mmput+0x118/0x420
 exit_mm+0x221/0x2d0
 do_exit+0x6cd/0x2360
 do_group_exit+0x22d/0x2f0
 __x64_sys_exit_group+0x3f/0x40
 x64_sys_call+0x221a/0x2240
 do_syscall_64+0x174/0x580
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb77b2d3a90
Code: Unable to access opcode bytes at 0x7fb77b2d3a66.
RSP: 002b:00007ffe32d58618 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007fb77b3c4860 RCX: 00007fb77b2d3a90
RDX: 00000000000000e7 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00007fb77b3c4860 R08: 00007ffe32d58490 R09: 00007ffe32d58570
R10: 00007ffe32d584d0 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fb77b3c8658 R15: 0000000000000001
 </TASK>


***

If these findings have caused you to resend the series or submit a
separate fix, please add the following tag to your commit message:
  Tested-by: [email protected]

---
This report is generated by a bot. It may contain errors.
syzbot ci engineers can be reached at [email protected].

To test a patch for this bug, please reply with `#syz test`
(should be on a separate line).

The patch should be attached to the email.
Note: arguments like custom git repos and branches are not supported.

The email will later be sent to:
[[email protected] [email protected] [email protected] baoli=
[email protected] [email protected] [email protected] chenr=
[email protected] [email protected] [email protected] [email protected] devnul=
[email protected] [email protected] [email protected] [email protected] kasong@t=
encent.com [email protected] [email protected] linux-mm@kvack=
.org [email protected] [email protected] [email protected] nico.pache@linu=
x.dev [email protected] [email protected] [email protected] roman.gushch=
[email protected] [email protected] [email protected] [email protected] s=
[email protected] [email protected] [email protected] [email protected]=
u [email protected] [email protected] [email protected] wangzicheng@ho=
nor.com [email protected] [email protected] [email protected]=
 [email protected] [email protected] [email protected] [email protected]]

If the report looks fine to you, reply with:
#syz upstream

If the report is a false positive, reply with
#syz invalid