[virtio-dev] Re: [PATCH] virtio-transport: Clarify requirements

On 18-12-23, 15:02, Cornelia Huck wrote:
> Other things that probably should be mandatory:
> 
> - A way for the driver to change the device status. Reading it would
>   probably be a strong SHOULD.
> - A way to implement config space. (For example, channel devices don't
>   have a config space or anything similar enough to repurpose, so I had
>   to invent a mechanism for ccw... maybe future transports will be in
>   the same boat.)

How about these changes now, before I post them again:

diff --git a/content.tex b/content.tex
index 0a62dce5f65f..2a86b1041747 100644
--- a/content.tex
+++ b/content.tex
@@ -631,8 +631,81 @@ \section{Device Cleanup}\label{sec:General Initialization And Device Operation /
 
 \chapter{Virtio Transport Options}\label{sec:Virtio Transport Options}
 
-Virtio can use various different buses, thus the standard is split
-into virtio general and bus-specific sections.
+Devices and drivers can use different transport methods to enable
+interaction, for example PCI, MMIO, or Channel I/O. The transport
+methods define various aspects of the communication between the device
+and the driver, like device discovery, exchanging capabilities,
+interrupt handling, data transfer, etc. For example, in a host/guest
+architecture, the host might expose a device to the guest on a PCI bus,
+and the guest will use a PCI-specific driver to interact with it.
+
+The standard is split into sections describing general virtio
+implementation and transport-specific sections.
+
+\section{Virtio Transport Requirements}\label{sec:Virtio Transport Options / Virtio Transport Requirements}
+
+The transport MUST provide a mechanism for the driver to discover the
+device.
+
+The transport must provide a mechanism for the driver to identify the
+device type.
+
+The transport MUST provide a mechanism for communicating virtqueue
+configurations between the device and the driver.
+
+The transport MUST allow multiple virtqueues per device. The number of
+virtqueues for a pair of device-driver are governed by the individual
+device protocol.
+
+The transport MUST provide a mechanism that the device and the driver
+use to access memory for implementing virtqueues.
+
+The transport MUST provide a mechanism for the device to notify the
+driver and a mechanism for the driver to notify the device, for example
+regarding availability of a buffer on the virtqueue.
+
+The transport MAY provide a mechanism for the driver to initiate a
+reset of the virtqueues and device.
+
+The transport MUST provide a mechanism for the driver to read the
+device status. The transport SHOULD provide a mechanism for the driver to
+change the device status.
+
+The transport MUST provide a mechanism to implement config space between
+the device and the driver.
+
+\devicenormative{\subsection}{Virtio Transport Requirements}{Virtio Transport Options}
+
+Any data associated with a device-initiated transaction MUST remain
+accessible to the driver until the driver acknowledges the transaction
+to be complete.
+
+The device MUST NOT access the contents of a virtqueue before the
+driver notifies, in a transport defined way, the device that the
+virtqueue is ready to be accessed.
+
+The device MUST NOT access or modify buffers on a virtqueue after it has
+notified the driver about their availability.
+
+The device MUST reset the virtqueues if requested, in a transport
+defined way, by the driver.
+
+\drivernormative{\subsection}{Virtio Transport Requirements}{Virtio Transport Options}
+
+The driver MUST acknowledge device notifications, as mandated by the
+transport.
+
+The driver MUST NOT access virtqueue contents before the device notifies
+about the readiness of the same.
+
+The driver MUST NOT access buffers, after it has added them to the
+virtqueue and notified the device about their availability. The driver
+MAY access them after the device has processed them and notified the
+driver of their availability, in a transport defined way.
+
+The driver MAY ask the device to reset the virtqueues if, for example,
+the driver times out waiting for a notification from the device for a
+previously queued request.
 
 \input{transport-pci.tex}
 \input{transport-mmio.tex}

-- 
viresh

---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]