Re: [PATCH 9/9] ARM: smp: remove arch-provided "pen_release"
Russell King - ARM Linux <[email protected]> Fri, 14 Dec 2018 13:12:00 +0000
| Newsgroups | io.groups.linux-oxnas,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-omap,org.kernel.vger.linux-samsung-soc |
|---|---|
| Message-ID | <[email protected]> |
On Fri, Dec 14, 2018 at 10:09:23AM +0530, Viresh Kumar wrote:
> On 13-12-18, 18:01, Russell King wrote:
> > diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
> > index 909b97c0b237..815333fc320c 100644
> > --- a/arch/arm/mach-spear/generic.h
> > +++ b/arch/arm/mach-spear/generic.h
> > @@ -20,6 +20,8 @@
> >
> > #include <asm/mach/time.h>
> >
> > +extern volatile int prima2_pen_release;
>
> prima2 ?
>
> I haven't tried but this may cause build regressions as well, I am
> surprised on how this passed for you.
Thanks.
These patches aren't all build tested - I don't see the point of wasting
hours build testing when these platforms /really/ need something better.
This is not supposed to be a finished patch, but a patch to get folk
to do something about this issue.
Please fix this issue properly. I can't give you a patch to do that,
you need to sort it yourself, but failure to do anything _will_ result
in an updated version of this patch being merged.
> > extern void spear13xx_timer_init(void);
> > extern void spear3xx_timer_init(void);
> > extern struct pl022_ssp_controller pl022_plat_data;
> > diff --git a/arch/arm/mach-spear/headsmp.S b/arch/arm/mach-spear/headsmp.S
> > index c52192dc3d9f..6e250b6c0aa2 100644
> > --- a/arch/arm/mach-spear/headsmp.S
> > +++ b/arch/arm/mach-spear/headsmp.S
> > @@ -43,5 +43,5 @@ pen: ldr r7, [r6]
> >
> > .align
> > 1: .long .
> > - .long pen_release
> > + .long spear_pen_release
> > ENDPROC(spear13xx_secondary_startup)
> > diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c
> > index 12edd1cf8a12..0dd84f609627 100644
> > --- a/arch/arm/mach-spear/hotplug.c
> > +++ b/arch/arm/mach-spear/hotplug.c
> > @@ -16,6 +16,8 @@
> > #include <asm/cp15.h>
> > #include <asm/smp_plat.h>
> >
> > +#include "generic.h"
> > +
> > static inline void cpu_enter_lowpower(void)
> > {
> > unsigned int v;
> > @@ -57,7 +59,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
> > for (;;) {
> > wfi();
> >
> > - if (pen_release == cpu) {
> > + if (spear_pen_release == cpu) {
> > /*
> > * OK, proper wakeup, we're done
> > */
> > diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
> > index 39038a03836a..b1ff4bb86f6d 100644
> > --- a/arch/arm/mach-spear/platsmp.c
> > +++ b/arch/arm/mach-spear/platsmp.c
> > @@ -20,16 +20,21 @@
> > #include <mach/spear.h>
> > #include "generic.h"
> >
> > +/* XXX spear_pen_release is cargo culted code - DO NOT COPY XXX */
> > +volatile int spear_pen_release = -1;
> > +
> > /*
> > - * Write pen_release in a way that is guaranteed to be visible to all
> > - * observers, irrespective of whether they're taking part in coherency
> > + * XXX CARGO CULTED CODE - DO NOT COPY XXX
> > + *
> > + * Write spear_pen_release in a way that is guaranteed to be visible to
> > + * all observers, irrespective of whether they're taking part in coherency
> > * or not. This is necessary for the hotplug code to work reliably.
> > */
> > -static void write_pen_release(int val)
> > +static void spear_write_pen_release(int val)
> > {
> > - pen_release = val;
> > + spear_pen_release = val;
> > smp_wmb();
> > - sync_cache_w(&pen_release);
> > + sync_cache_w(&spear_pen_release);
> > }
> >
> > static DEFINE_SPINLOCK(boot_lock);
> > @@ -42,7 +47,7 @@ static void spear13xx_secondary_init(unsigned int cpu)
> > * let the primary processor know we're out of the
> > * pen, then head off into the C entry point
> > */
> > - write_pen_release(-1);
> > + spear_write_pen_release(-1);
> >
> > /*
> > * Synchronise with the boot thread.
> > @@ -64,17 +69,17 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > /*
> > * The secondary processor is waiting to be released from
> > * the holding pen - release it, then wait for it to flag
> > - * that it has been released by resetting pen_release.
> > + * that it has been released by resetting spear_pen_release.
> > *
> > - * Note that "pen_release" is the hardware CPU ID, whereas
> > + * Note that "spear_pen_release" is the hardware CPU ID, whereas
> > * "cpu" is Linux's internal ID.
> > */
> > - write_pen_release(cpu);
> > + spear_write_pen_release(cpu);
> >
> > timeout = jiffies + (1 * HZ);
> > while (time_before(jiffies, timeout)) {
> > smp_rmb();
> > - if (pen_release == -1)
> > + if (spear_pen_release == -1)
> > break;
> >
> > udelay(10);
> > @@ -86,7 +91,7 @@ static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > */
> > spin_unlock(&boot_lock);
> >
> > - return pen_release != -1 ? -ENOSYS : 0;
> > + return spear_pen_release != -1 ? -ENOSYS : 0;
> > }
> >
> > /*
> > --
> > 2.7.4
>
> --
> viresh
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up