Re: [PATCH 3/3] configs: amlogic: set board family to avoid random MAC on WeTek Hub/Play2

[email protected] Mon, 18 Mar 2024 09:50:00 +0100

Newsgroups	io.groups.u-boot-amlogic,org.infradead.lists.linux-amlogic,org.u-boot-project.lists.u-boot
Organization	Linaro Developer Services
Message-ID	<[email protected]>

Hi,

On 16/03/2024 14:54, Christian Hewitt wrote:
> Add CONFIG_SYS_BOARD="p200" to the Hub/Play2 board configs to ensure the
> factory programmed MAC is correctly read from efuse.
> 
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
>   configs/wetek-hub_defconfig   | 1 +
>   configs/wetek-play2_defconfig | 1 +
>   2 files changed, 2 insertions(+)
> 
> diff --git a/configs/wetek-hub_defconfig b/configs/wetek-hub_defconfig
> index fd92b041e73..413bbfe9ab7 100644
> --- a/configs/wetek-hub_defconfig
> +++ b/configs/wetek-hub_defconfig
> @@ -1,5 +1,6 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_MESON=y
> +CONFIG_SYS_BOARD="p200"
>   CONFIG_TEXT_BASE=0x01000000
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> diff --git a/configs/wetek-play2_defconfig b/configs/wetek-play2_defconfig
> index b887419a6ba..dd98929444c 100644
> --- a/configs/wetek-play2_defconfig
> +++ b/configs/wetek-play2_defconfig
> @@ -1,5 +1,6 @@
>   CONFIG_ARM=y
>   CONFIG_ARCH_MESON=y
> +CONFIG_SYS_BOARD="p200"
>   CONFIG_TEXT_BASE=0x01000000
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y


CONFIG_SYS_BOARD="p200" is already the default value for MESON_GXBB, see arch/arm/mach-meson/Kconfig

Neil