Re: [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM

Arseniy Krasnov <[email protected]>
Newsgroups io.groups.u-boot-amlogic,org.u-boot-project.lists.u-boot
Message-ID <[email protected]>
Hi, sorry, pls ping  😄

Thanks

On 08.07.2024 10:13, Arseniy Krasnov wrote:
> Patchset is based on patchset for Linux (today merged to nand-next):
> https://lore.kernel.org/linux-mtd/[email protected]/
> 
> Here is description from it:
> 
>  >  Amlogic's boot ROM code needs that some pages on NAND must be written
>  >  in special "short" ECC mode with scrambling enabled. Such pages:
>  >  1) Contain some metadata about hardware.
>  >  2) Located with some interval starting from 0 offset, until some
>  >     specified offset. Interval and second offset are set in the
>  >     device tree.
>  >  
>  >  This patchset adds R/W support for such pages. To enable it we can setup
>  >  it in dts:
>  >  
>  >      nand-is-boot-medium;
>  >      amlogic,boot-pages = <1024>;
>  >      amlogic,boot-page-step = <128>;
>  >  
>  >  It means that each 128th page in range 0 to 1024 pages will be accessed
>  >  in special mode ("short" ECC + scrambling). In practice this feature is
>  >  needed when we want to update first block of NAND - driver will enable
>  >  required mode by itself using value from device tree.
> 
> The only difference is that patchset for Linux updates DT bindings, while
> this adds NAND_IS_BOOT_MEDIUM flag support.
> 
> Changelog:
>  v1 -> v2:
>  * Pls see per-patch changelog.
> 
> Arseniy Krasnov (3):
>   mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag
>   mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()'
>   mtd: rawnand: meson: read/write access for boot ROM pages
> 
>  drivers/mtd/nand/raw/meson_nand.c | 84 +++++++++++++++++++++----------
>  drivers/mtd/nand/raw/nand_base.c  |  3 ++
>  include/linux/mtd/rawnand.h       |  5 ++
>  3 files changed, 65 insertions(+), 27 deletions(-)
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.