[PATCH v2 1/5] power: regulator: Trigger probe of regulators which are always-on or boot-on

In case a regulator DT node contains regulator-always-on or regulator-boot-on
property, make sure the regulator gets correctly configured by U-Boot on start
up. Unconditionally probe such regulator drivers. This is a preparatory patch
for introduction of .regulator_post_probe() which would trigger the regulator
configuration.

Parsing of regulator-always-on and regulator-boot-on DT property has been
moved to regulator_post_bind() as the information is required early, the
rest of the DT parsing has been kept in regulator_pre_probe() to avoid
slowing down the boot process.

Signed-off-by: Marek Vasut <[email protected]>
---
Cc: Ben Wolsieffer <[email protected]>
Cc: Caleb Connolly <[email protected]>
Cc: Chris Morgan <[email protected]>
Cc: Dragan Simic <[email protected]>
Cc: Eugen Hristev <[email protected]>
Cc: Francesco Dolcini <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Jonas Karlman <[email protected]>
Cc: Kever Yang <[email protected]>
Cc: Kostya Porotchkin <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: Philipp Tomsich <[email protected]>
Cc: Quentin Schulz <[email protected]>
Cc: Sam Day <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Sumit Garg <[email protected]>
Cc: Svyatoslav Ryhel <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Volodymyr Babchuk <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: - Rebase on current u-boot/next
    - Update test cases to handle already started regulators correctly
---
 drivers/power/regulator/regulator-uclass.c | 22 +++++++++++++++-------
 test/dm/panel.c                            |  2 +-
 test/dm/regulator.c                        |  4 ++--
 3 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
index 88a8525b3c4..e2f703702e3 100644
--- a/drivers/power/regulator/regulator-uclass.c
+++ b/drivers/power/regulator/regulator-uclass.c
@@ -433,6 +433,8 @@ static int regulator_post_bind(struct udevice *dev)
 	const char *property = "regulator-name";
 
 	uc_pdata = dev_get_uclass_plat(dev);
+	uc_pdata->always_on = dev_read_bool(dev, "regulator-always-on");
+	uc_pdata->boot_on = dev_read_bool(dev, "regulator-boot-on");
 
 	/* Regulator's mandatory constraint */
 	uc_pdata->name = dev_read_string(dev, property);
@@ -444,13 +446,21 @@ static int regulator_post_bind(struct udevice *dev)
 			return -EINVAL;
 	}
 
-	if (regulator_name_is_unique(dev, uc_pdata->name))
-		return 0;
+	if (!regulator_name_is_unique(dev, uc_pdata->name)) {
+		debug("'%s' of dev: '%s', has nonunique value: '%s\n",
+		      property, dev->name, uc_pdata->name);
+		return -EINVAL;
+	}
 
-	debug("'%s' of dev: '%s', has nonunique value: '%s\n",
-	      property, dev->name, uc_pdata->name);
+	/*
+	 * In case the regulator has regulator-always-on or
+	 * regulator-boot-on DT property, trigger probe() to
+	 * configure its default state during startup.
+	 */
+	if (uc_pdata->always_on && uc_pdata->boot_on)
+		dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);
 
-	return -EINVAL;
+	return 0;
 }
 
 static int regulator_pre_probe(struct udevice *dev)
@@ -473,8 +483,6 @@ static int regulator_pre_probe(struct udevice *dev)
 						-ENODATA);
 	uc_pdata->max_uA = dev_read_u32_default(dev, "regulator-max-microamp",
 						-ENODATA);
-	uc_pdata->always_on = dev_read_bool(dev, "regulator-always-on");
-	uc_pdata->boot_on = dev_read_bool(dev, "regulator-boot-on");
 	uc_pdata->ramp_delay = dev_read_u32_default(dev, "regulator-ramp-delay",
 						    0);
 	uc_pdata->force_off = dev_read_bool(dev, "regulator-force-boot-off");
diff --git a/test/dm/panel.c b/test/dm/panel.c
index ce835c96ed0..ec85a9b1e6e 100644
--- a/test/dm/panel.c
+++ b/test/dm/panel.c
@@ -33,7 +33,7 @@ static int dm_test_panel(struct unit_test_state *uts)
 	ut_assertok(sandbox_pwm_get_config(pwm, 0, &period_ns, &duty_ns,
 					   &enable, &polarity));
 	ut_asserteq(false, enable);
-	ut_asserteq(false, regulator_get_enable(reg));
+	ut_asserteq(true, regulator_get_enable(reg));
 
 	ut_assertok(panel_enable_backlight(dev));
 	ut_assertok(sandbox_pwm_get_config(pwm, 0, &period_ns, &duty_ns,
diff --git a/test/dm/regulator.c b/test/dm/regulator.c
index 532bbd82376..449748ad52f 100644
--- a/test/dm/regulator.c
+++ b/test/dm/regulator.c
@@ -186,7 +186,7 @@ int dm_test_power_regulator_set_enable_if_allowed(struct unit_test_state *uts)
 
 	/* Get BUCK1 - always on regulator */
 	platname = regulator_names[BUCK1][PLATNAME];
-	ut_assertok(regulator_autoset_by_name(platname, &dev_autoset));
+	ut_asserteq(-EALREADY, regulator_autoset_by_name(platname, &dev_autoset));
 	ut_assertok(regulator_get_by_platname(platname, &dev));
 
 	/* Try disabling always-on regulator */
@@ -288,7 +288,7 @@ static int dm_test_power_regulator_autoset(struct unit_test_state *uts)
 	 * Expected output state: uV=1200000; uA=200000; output enabled
 	 */
 	platname = regulator_names[BUCK1][PLATNAME];
-	ut_assertok(regulator_autoset_by_name(platname, &dev_autoset));
+	ut_asserteq(-EALREADY, regulator_autoset_by_name(platname, &dev_autoset));
 
 	/* Check, that the returned device is proper */
 	ut_assertok(regulator_get_by_platname(platname, &dev));
-- 
2.45.2