Re: [PATCH 5/6] configs: khadas-vim3_android{_ab}: move on bootmeth android

Hi Guillaume,

Thank you for the patch.

On jeu., oct. 17, 2024 at 18:10, Guillaume La Roque <[email protected]> wrote:

> Actually khadas vim3 use distro command to boot android image.
> Move on new bootmeth android for A/B and non-A/B vim3 android.
>
> Signed-off-by: Guillaume La Roque <[email protected]>
> ---
>  configs/khadas-vim3_android_ab_defconfig |  7 ++++++-
>  configs/khadas-vim3_android_defconfig    |  7 ++++++-
>  include/configs/khadas-vim3_android.h    | 27 +++++++++++++++++++++++----
>  3 files changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig
> index de5357c45cbf..a078c5d363ae 100644
> --- a/configs/khadas-vim3_android_ab_defconfig
> +++ b/configs/khadas-vim3_android_ab_defconfig
> @@ -24,6 +24,12 @@ CONFIG_REMAKE_ELF=y
>  CONFIG_FIT=y
>  CONFIG_FIT_SIGNATURE=y
>  CONFIG_FIT_VERBOSE=y
> +CONFIG_BOOTMETH_ANDROID=y
> +# CONFIG_BOOTMETH_EXTLINUX is not set
> +# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
> +# CONFIG_BOOTMETH_EFILOADER is not set
> +# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
> +# CONFIG_BOOTMETH_VBE is not set
>  CONFIG_LEGACY_IMAGE_FORMAT=y
>  CONFIG_OF_BOARD_SETUP=y
>  # CONFIG_DISPLAY_CPUINFO is not set
> @@ -35,7 +41,6 @@ CONFIG_SYS_MAXARGS=32
>  CONFIG_CMD_ADTIMG=y
>  CONFIG_CMD_ABOOTIMG=y
>  # CONFIG_CMD_IMI is not set
> -CONFIG_CMD_BCB=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
> diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig
> index a0d9c423c3c3..b77a44ce859b 100644
> --- a/configs/khadas-vim3_android_defconfig
> +++ b/configs/khadas-vim3_android_defconfig
> @@ -24,6 +24,12 @@ CONFIG_REMAKE_ELF=y
>  CONFIG_FIT=y
>  CONFIG_FIT_SIGNATURE=y
>  CONFIG_FIT_VERBOSE=y
> +CONFIG_BOOTMETH_ANDROID=y
> +# CONFIG_BOOTMETH_EXTLINUX is not set
> +# CONFIG_BOOTMETH_EXTLINUX_PXE is not set
> +# CONFIG_BOOTMETH_EFILOADER is not set
> +# CONFIG_BOOTMETH_EFI_BOOTMGR is not set
> +# CONFIG_BOOTMETH_VBE is not set
>  CONFIG_LEGACY_IMAGE_FORMAT=y
>  CONFIG_OF_BOARD_SETUP=y
>  # CONFIG_DISPLAY_CPUINFO is not set
> @@ -34,7 +40,6 @@ CONFIG_SYS_MAXARGS=32
>  CONFIG_CMD_ADTIMG=y
>  CONFIG_CMD_ABOOTIMG=y
>  # CONFIG_CMD_IMI is not set
> -CONFIG_CMD_BCB=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
> diff --git a/include/configs/khadas-vim3_android.h b/include/configs/khadas-vim3_android.h
> index 0e2953fe71b3..498afd0287f4 100644
> --- a/include/configs/khadas-vim3_android.h
> +++ b/include/configs/khadas-vim3_android.h
> @@ -41,10 +41,29 @@
>  	"name=rootfs,size=-,uuid=" ROOT_UUID
>  #endif
>  
> -#define EXTRA_ANDROID_ENV_SETTINGS \
> -	"board=vim3\0" \
> -	"board_name=vim3\0" \
> +#define CFG_EXTRA_ENV_SETTINGS                                    \
> +	"board=vim3\0"                                               \
> +	"board_name=vim3\0"                                          \
> +	"bootmeths=android\0"                                         \
> +	"bootcmd=bootflow scan\0"                                     \
> +	"adtb_idx=3\0"                                                \
> +	"partitions=" PARTS_DEFAULT "\0"                              \
> +	"mmcdev=2\0"                                                  \
> +	"fastboot_raw_partition_bootloader=0x1 0xfff mmcpart 1\0"     \
> +	"fastboot_raw_partition_bootenv=0x0 0xfff mmcpart 2\0"        \
> +	"gpio_recovery=88\0"                                          \
> +	"check_button=gpio input ${gpio_recovery};test $? -eq 0;\0"   \

What is check_button needed for ?
It's used in include/configs/meson64_android.h to check if we should
boot recovery but since we no longer use that file here I think we can
safely remove this.

> +	"stdin=" STDIN_CFG "\0"                                       \
> +	"stdout=" STDOUT_CFG "\0"                                     \
> +	"stderr=" STDOUT_CFG "\0"                                     \
> +	"dtboaddr=0x08200000\0"                                       \
> +	"loadaddr=0x01080000\0"                                       \
> +	"fdt_addr_r=0x01000000\0"                                     \
> +	"scriptaddr=0x08000000\0"                                     \
> +	"kernel_addr_r=0x01080000\0"                                  \
> +	"pxefile_addr_r=0x01080000\0"                                 \
> +	"ramdisk_addr_r=0x13000000\0"                                 \
>  
> -#include <configs/meson64_android.h>

Should we also patch configs/meson64_android.h to remove everything
related to VIM3L? This way, we don't keep unused code in there.

> +#include <configs/meson64.h>
>  
>  #endif /* __CONFIG_H */
>
> -- 
> 2.34.1