[RFC v1 0/7] common: usb_onboard_hub: Add support for Odroid onboard USB hub reset

Anand Moon <[email protected]> Fri, 9 May 2025 12:32:05 +0530

Newsgroups	io.groups.u-boot-amlogic,org.u-boot-project.lists.u-boot
Message-ID	<[email protected]>

Odroid C1+/C2/C4/N2/N2-plus devices have an onboard USB hub
controlled by a reset GPIO pin. Adds changes to the onboard USB hub
driver to perform a proper reset of the USB hub.

Added conditional compilation for I2C initialization based
on CONFIG_DM_I2C for failed to compile.

Thanks
-Anand

Anand Moon (7):
  usb: onboard-hub: Add support for Genesys GL852G hub
  configs: odorid-c2: Enable Onboard HUB driver
  usb: onboard-hub: Add support for Genesys GL853G
  configs: odorid-n2: Enable Oboard HUB driver
  usb: onboard-hub: Add support for VL817 USB hub
  configs: odorid-c4: Enable Oboard HUB driver
  usb: onboard-hub: Add conditional compilation for I2C initialization

 common/usb_onboard_hub.c    | 28 ++++++++++++++++++++++++++++
 configs/odroid-c2_defconfig |  1 +
 configs/odroid-c4_defconfig |  1 +
 configs/odroid-n2_defconfig |  1 +
 4 files changed, 31 insertions(+)


base-commit: 48db49b0977cc1c9c9abf82c0fb704238fcef4fd
-- 
2.49.0