[PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver

The clock driver is too big for U-Boot SPL at the moment.  In the
meantime, continue mmc init even if it is not present.

Signed-off-by: Ferass El Hafidi <[email protected]>
---
 drivers/mmc/meson_gx_mmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index a4338f1e29c1da07acb0333be9b75a318cba1334..d83a79fa0894fc6a32c40642ebce5f845120efaf 100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -332,11 +332,11 @@ static int meson_mmc_probe(struct udevice *dev)
 
 	/* Enable the clocks feeding the MMC controller */
 	ret = clk_get_bulk(dev, &clocks);
-	if (ret)
+	if (ret && ret != -ENOSYS)
 		return ret;
 
 	ret = clk_enable_bulk(&clocks);
-	if (ret)
+	if (ret && ret != -ENOSYS)
 		return ret;
 
 	cfg->voltages = MMC_VDD_33_34 | MMC_VDD_32_33 |

-- 
2.51.0