Re: [PATCH] doc: boards: amlogic: update documentation for Beelink GT1 Ultimate

Hi,

On 6/5/26 09:56, Karl Chan wrote:
> fix formating

Missing [email protected] and myself in recipient, and please make a little more effort in the commit message...

Thanks,
Neil

> 
> Signed-off-by: Karl Chan <[email protected]>
> ---
>   doc/board/amlogic/beelink-gt1-ultimate.rst | 104 ++++++++++-----------
>   1 file changed, 52 insertions(+), 52 deletions(-)
> 
> diff --git a/doc/board/amlogic/beelink-gt1-ultimate.rst b/doc/board/amlogic/beelink-gt1-ultimate.rst
> index a78a1a2ff25..22afae0ed40 100644
> --- a/doc/board/amlogic/beelink-gt1-ultimate.rst
> +++ b/doc/board/amlogic/beelink-gt1-ultimate.rst
> @@ -30,19 +30,19 @@ U-Boot Compilation
>   
>   .. code-block:: bash
>   
> -    $ export CROSS_COMPILE=aarch64-none-elf-
> -    $ make beelink-gt1-ultimate_defconfig
> -    $ make
> +    $ export CROSS_COMPILE=aarch64-none-elf-
> +    $ make beelink-gt1-ultimate_defconfig
> +    $ make
>   
>   U-Boot Signing with Pre-Built FIP repo
>   --------------------------------------
>   
>   .. code-block:: bash
>   
> -    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> -    $ cd amlogic-boot-fip
> -    $ mkdir my-output-dir
> -    $ ./build-fip.sh beelink-gt1 /path/to/u-boot/u-boot.bin my-output-dir
> +    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> +    $ cd amlogic-boot-fip
> +    $ mkdir my-output-dir
> +    $ ./build-fip.sh beelink-gt1 /path/to/u-boot/u-boot.bin my-output-dir
>   
>   U-Boot Manual Signing
>   ---------------------
> @@ -53,58 +53,58 @@ for signing. However you can download them from the amlogic-fip-repo.
>   
>   .. code-block:: bash
>   
> -    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> -    $ cd amlogic-boot-fip/beelink-gt1
> -    $ export FIPDIR=$PWD
> +    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> +    $ cd amlogic-boot-fip/beelink-gt1
> +    $ export FIPDIR=$PWD
>   
>   Go back to the mainline U-Boot source tree then:
>   
>   .. code-block:: bash
>   
> -    $ mkdir fip
> -    $ cp $FIPDIR/bl2.bin fip/
> -    $ cp $FIPDIR/acs.bin fip/
> -    $ cp $FIPDIR/bl21.bin fip/
> -    $ cp $FIPDIR/bl30.bin fip/
> -    $ cp $FIPDIR/bl301.bin fip/
> -    $ cp $FIPDIR/bl31.img fip/
> -    $ cp u-boot.bin fip/bl33.bin
> -
> -    $ $FIPDIR/blx_fix.sh \
> -              fip/bl30.bin \
> -              fip/zero_tmp \
> -              fip/bl30_zero.bin \
> -              fip/bl301.bin \
> -              fip/bl301_zero.bin \
> -              fip/bl30_new.bin \
> -              bl30
> -
> -    $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> -
> -    $ $FIPDIR/blx_fix.sh \
> -              fip/bl2_acs.bin \
> -              fip/zero_tmp \
> -              fip/bl2_zero.bin \
> -              fip/bl21.bin \
> -              fip/bl21_zero.bin \
> -              fip/bl2_new.bin \
> -              bl2
> -
> -    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
> -    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl31.img
> -    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
> -    $ $FIPDIR/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
> -    $ $FIPDIR/aml_encrypt_gxl --bootmk \
> -                              --output fip/u-boot.bin \
> -                              --bl2 fip/bl2.n.bin.sig \
> -                              --bl30 fip/bl30_new.bin.enc \
> -                              --bl31 fip/bl31.img.enc \
> -                              --bl33 fip/bl33.bin.enc
> +    $ mkdir fip
> +    $ cp $FIPDIR/bl2.bin fip/
> +    $ cp $FIPDIR/acs.bin fip/
> +    $ cp $FIPDIR/bl21.bin fip/
> +    $ cp $FIPDIR/bl30.bin fip/
> +    $ cp $FIPDIR/bl301.bin fip/
> +    $ cp $FIPDIR/bl31.img fip/
> +    $ cp u-boot.bin fip/bl33.bin
> +
> +    $ $FIPDIR/blx_fix.sh \
> +              fip/bl30.bin \
> +              fip/zero_tmp \
> +              fip/bl30_zero.bin \
> +              fip/bl301.bin \
> +              fip/bl301_zero.bin \
> +              fip/bl30_new.bin \
> +              bl30
> +
> +    $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> +
> +    $ $FIPDIR/blx_fix.sh \
> +              fip/bl2_acs.bin \
> +              fip/zero_tmp \
> +              fip/bl2_zero.bin \
> +              fip/bl21.bin \
> +              fip/bl21_zero.bin \
> +              fip/bl2_new.bin \
> +              bl2
> +
> +    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
> +    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl31.img
> +    $ $FIPDIR/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
> +    $ $FIPDIR/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
> +    $ $FIPDIR/aml_encrypt_gxl --bootmk \
> +                              --output fip/u-boot.bin \
> +                              --bl2 fip/bl2.n.bin.sig \
> +                              --bl30 fip/bl30_new.bin.enc \
> +                              --bl31 fip/bl31.img.enc \
> +                              --bl33 fip/bl33.bin.enc
>   
>   Then write U-Boot to SD or eMMC with:
>   
>   .. code-block:: bash
>   
> -    $ DEV=/dev/boot_device
> -    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> -    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
> +    $ DEV=/dev/boot_device
> +    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> +    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440