Re: [PATCH 0/4] Add Amlogic T7 (A311D2) and Khadas VIM4 support

Hi Lucas,

On 8/6/26 12:18, Lucas Tanure wrote:
> This series adds initial mainline support for the Amlogic T7 SoC
> family and the Khadas VIM4 board (A311D2):
>   - S4-generation UART support
>   - the T7 platform code
>   - VIM4 board and defconfig
>   - VIM4 documentation
> 
> Tested on a Khadas VIM4 board, both chainloaded from the vendor U-Boot
> (tftpboot) and cold-booted from an SD card.
> 
> Lucas Tanure (4):
>    serial: meson: add Amlogic S4 UART support
>    arm: meson: add Amlogic T7 SoC family support
>    board: amlogic: add Khadas VIM4 support
>    doc: board: amlogic: add Khadas VIM4 documentation

Overall this looks good, I'll review all the changes closely,

Neil

> 
>   .../amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi |  22 ++++
>   arch/arm/include/asm/arch-meson/boot0.h       |  18 +++
>   arch/arm/mach-meson/Kconfig                   |  10 ++
>   arch/arm/mach-meson/Makefile                  |   1 +
>   arch/arm/mach-meson/board-t7.c                |  97 ++++++++++++++
>   board/amlogic/vim4/MAINTAINERS                |   8 ++
>   board/amlogic/vim4/Makefile                   |   4 +
>   board/amlogic/vim4/vim4.c                     |  14 ++
>   configs/khadas-vim4_defconfig                 |  27 ++++
>   doc/board/amlogic/index.rst                   | 119 ++++++++---------
>   doc/board/amlogic/khadas-vim4.rst             | 122 ++++++++++++++++++
>   drivers/serial/serial_meson.c                 |  51 ++++++--
>   12 files changed, 421 insertions(+), 72 deletions(-)
>   create mode 100644 arch/arm/dts/amlogic-t7-a311d2-khadas-vim4-u-boot.dtsi
>   create mode 100644 arch/arm/include/asm/arch-meson/boot0.h
>   create mode 100644 arch/arm/mach-meson/board-t7.c
>   create mode 100644 board/amlogic/vim4/MAINTAINERS
>   create mode 100644 board/amlogic/vim4/Makefile
>   create mode 100644 board/amlogic/vim4/vim4.c
>   create mode 100644 configs/khadas-vim4_defconfig
>   create mode 100644 doc/board/amlogic/khadas-vim4.rst
>