Re: [Buildroot] [PATCH v3] package/libcppconnman: add new package

Hi Andrea,

On 21/07/2026 09:06, Andrea Ricchi wrote:
> Hi Julien,
> 
> Thanks again for the review, and sorry about the pipeline issue.
> 
> I tried running ./utils/test-pkg -a -p libcppconnman locally and got
> bootlin-sparc-uclibc [24/32]: OK. In my .config, I have the following
> set:
> 
> BR2_PACKAGE_LIBCPPCONNMAN=y
> BR2_PACKAGE_LIBCPPCONNMAN_EXAMPLE=y
> 
> Do you have any idea why it works on my machine but fails in the
> GitLab pipeline? Could it be due to some specific build environment
> configuration?

The host environment should not have any impact for this kind of issue.

Are you using the correct command and are you looking at
the right config file?

For enabling examples in a test-pkg run, you should use
commands like:

cat >my.config <<EOF
BR2_PACKAGE_LIBCPPCONNMAN=y
BR2_PACKAGE_LIBCPPCONNMAN_EXAMPLE=y
EOF
utils/test-pkg -a -p libcppconnman -c my.config

The generated config of a failing builds should be in:
"~/br-test-pkg/bootlin-microblazeel-uclibc/.config"
rather than in "./.config".

> Thanks!
> 
> Andrea Ricchi
> Embedded Software Engineer
> M. +39 333 775 4973
> [email protected]
> ―――――――――――――――
> Amarula Solutions SRL
>  Via Felice Cavallotti 25D, 41012 Carpi, MO, IT
> [email protected]
> www.amarulasolutions.com [2]
> 
> On Mon, Jul 20, 2026 at 9:22 PM Julien Olivain <[email protected]> wrote:
> 
>> Hi Andrea,
>> 
>> Thanks for the updated patch!
>> 
>> On 20/07/2026 14:22, Andrea Ricchi wrote:
>>> libcppconnman is a C++ library that provides an easy-to-use API
>>> to communicate with ConnMan over D-Bus using GDBus.
>>> 
>>> https://github.com/amarula/libcppconnman
>>> 
>>> Also add myself to DEVELOPERS for this package.
>>> 
>>> Signed-off-by: Andrea Ricchi <[email protected]>
>>> ---
>>> Changes v2 -> v3:
>>> - Config.in: add BR2_TOOLCHAIN_GCC_AT_LEAST_10 dependency (C++20
>> /
>>> <ranges>),
>>> fixing build failures on GCC < 10 toolchains reported by the
>>> autobuilders
>>> - Config.in, libcppconnman.mk [1]: select and depend on readline
>> for the
>>> example,
>>> fixing the missing readline library configure error when
>> examples
>>> are enabled
>>> 
>>> Changes v1 -> v2:
>>> - add missing libcppconnman entry in package/Config.in
>>> - merge the DEVELOPERS addition into this patch
>>> 
>>> DEVELOPERS                               |  1 +
>>> package/Config.in                        |  1 +
>>> package/libcppconnman/Config.in          | 28
>> ++++++++++++++++++++++++
>>> package/libcppconnman/libcppconnman.hash |  3 +++
>>> package/libcppconnman/libcppconnman.mk [1]   | 25
>> +++++++++++++++++++++
>>> 5 files changed, 58 insertions(+)
>>> create mode 100644 package/libcppconnman/Config.in
>>> create mode 100644 package/libcppconnman/libcppconnman.hash
>>> create mode 100644 package/libcppconnman/libcppconnman.mk [1]
>>> 
>> [...]
>>> diff --git a/package/libcppconnman/Config.in
>>> b/package/libcppconnman/Config.in
>>> new file mode 100644
>>> index 0000000000..d99d711e25
>>> --- /dev/null
>>> +++ b/package/libcppconnman/Config.in
>>> @@ -0,0 +1,28 @@
>>> +config BR2_PACKAGE_LIBCPPCONNMAN
>>> +     bool "libcppconnman"
>>> +     depends on BR2_INSTALL_LIBSTDCPP
>>> +     depends on BR2_TOOLCHAIN_GCC_AT_LEAST_10 # C++20
>>> +     depends on BR2_USE_WCHAR # libglib2
>>> +     depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
>>> +     depends on BR2_USE_MMU # libglib2
>>> +     select BR2_PACKAGE_LIBGLIB2
>>> +     help
>>> +       libcppconnman provide easy to use C++ API to communicate
>>> +       with ConnMan via the DBus using GDBus.
>>> +
>>> +       https://amarula.github.io/libcppconnman/
>>> +
>>> +comment "libcppconnman needs a toolchain w/ C++20, wchar,
>> threads"
>>> +     depends on BR2_USE_MMU
>>> +     depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
>>> +             !BR2_TOOLCHAIN_HAS_THREADS ||
>> !BR2_TOOLCHAIN_GCC_AT_LEAST_10
>>> +
>>> +if BR2_PACKAGE_LIBCPPCONNMAN
>>> +
>>> +config BR2_PACKAGE_LIBCPPCONNMAN_EXAMPLE
>>> +     bool "libcppconnman example"
>> 
>> It seems there is still 2 build failures with the examples. See:
>> https://gitlab.com/jolivain/buildroot/-/pipelines/2691451879
>> 
>> It is likely due to a missing dependency on
>> BR2_TOOLCHAIN_HAS_SYNC_1.
>> 
>> Could you have a look please?
>> 
>>> +     select BR2_PACKAGE_READLINE
>>> +     help
>>> +       Compile CLI example.
>>> +
>>> +endif
>> 
>> Best regards,
>> 
>> Julien.
> 
> 
> Links:
> ------
> [1] http://libcppconnman.mk
> [2] http://www.amarulasolutions.com/

Best regards,

Julien.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot